In order to install any original firmware, you must do the following:
Copy the dload folder with all its contents to the root of the SD card;
Turn off the tablet;
Insert the SD card if it was removed;
While holding the Volume Up key, press and hold the Power button until the screen blinks. The Volume Up button must be held until the installation process begins (a green robot and a progress bar will appear);
Finally, when prompted, remove the SD card or hold the Power button for 10 seconds.
Note: In some cases, you don’t need to press the buttons at all and the process will start automatically after turning on/rebooting.
If the update process does not start, you need to open the calculator, enter ()()2846579()()= and then select Project Menu Act -> Upgrade ->SD Card upgrade.
Attention!
Do not remove the card or press the power button until the process is complete and the appropriate prompt appears on the screen;
If the power is lost during the installation process, repeat the firmware process;
After copying the firmware to the SD card, check if it is damaged (copy the firmware files, disconnect and then connect the SD card, check that the *.zip files in the firmware open without errors on the computer).
Delete the firmware file from the SD card or rename the dload folder if you don’t want to accidentally update your tablet again!
Choose an update method based on your needs.
Huawei y7 2020 dub-lx1 firmware downgrade, downgrade firmware, unbrick, steel logo and etc…
Today I want to describe the process of downgrading the firmware version on Huawei y7 2020 or dub-lx1. Absolutely without the use of any boxes or dongles or other paid software, for example HCU. I needed to downgrade the firmware because the smart phone arrived with damaged software, and the programmer refused to restore it with the current Google patch. It was patch 136. After digging through a bunch of Internet sites, I found solutions in the form of paid firmware from Indians and Arabs. And that’s it, there’s nothing on our resources. True, there is one firmware on the pda, but after it the sound of conversation during a call disappears completely. But first things first…
So, if you have a dub-lx1 model and you need to flash it with a firmware downgrade, you will have to disassemble it. Because all manipulations will go through the testpoint. There are a lot of videos of the phone working on YouTube, and the disassembly itself is not difficult. So we sorted it out. Next photo of the testpoint:
To flash the firmware, you need to turn off your smartphone and close two contacts, they are indicated by red arrows in the photo. I couldn’t find a decent photo of a testpoint for this smartphone on the Internet, so I had to draw it myself). A paper clip or tweezers are enough.
So there is a board firmware that, through a testpoint, will help you downgrade the firmware or restore the brick. But after flashing the sound will disappear and it will be necessary to restore it. The firmware and flasher are located:
firmware
stitcher
Launch the flasher, select the Huawei tab, the firmware should be unpacked. We close the testpoint on the switched off phone, connect the cable, hear the connection sound in Windows, release the testpoint, click on the see photo button in the program and select the file in the folder with the xml firmware and the firmware will start by itself, you just need to wait.
You can turn on the phone and carry out further manipulations for which you made a downgrade. The same firmware can be used to raise the software brick.
If after the firmware the sound does not work for you during a call. Microphone and speaker sound. That is, the firmware for recovery is also board. Firmware via SD card is not suitable, it will not help. Updating via hisuite software will not help either, I checked it personally. The phone was updated to the latest firmware, but the sound did not appear, which is of course strange.
So another board firmware, sewn via a computer. She helped me restore my sound. By the way, maybe she can also restore bricks and downgrade the version. Try it.
You need to sew it through qprst, using the qfile program, that’s exactly what I did. Everything worked out. qprts can be found online in bulk.
firmware here
password for firmware GSMALIIMRAN
To flash via qfile, you need basic skills in working with qprst in order to insert files correctly. You also need to sew through testpoint.
I warn you!!! After this firmware you will have to restore your serial number . Therefore, make a backup of efs, if there are no programmers, then think about whether it’s worth sewing. You must understand what you are doing yourself.
By and large, the article was written for people who have the skills to repair phones and have the necessary equipment. I was faced with the problem of downgrading the firmware version and decided to share the solution here. At the time of writing, all links are working, if one stops working, write me, I’ll upload it.
Externally, the tablet resembles a good expensive business device. All parts are laconic and made mainly of aluminum. Although this feeling is only from the outside. The screen is covered with ordinary glass – no Gorilla Glass, no oleophobic coating. Constant scratches and “fingers” on the screen are guaranteed.
Front view of tablet
Behind the glass, the front camera is clearly visible, which has its place in one of the corners of the tablet.
Tablet back cover
The back cover of the tablet is almost completely covered with metal (aluminum), with the exception of two plastic inserts with a soft-touch coating. One of them has a 5-megapixel fullHD camera built into it. Behind the other insert are two slots: for SIM and microSD cards.
Slots behind removable cover
The thick metal edging is not overloaded with functional elements; on the contrary, their arrangement is quite laconic. On the right side there are integral volume keys
and a lock/power key
.
Function keys
On top of the tablet there is a mini-Jack headphone jack
and two speakers
.
Top of tablet
On the bottom edge there is a charger connection port
, two micro-interfaces HDMI and USB , as well as a hidden Reset key
.
Interfaces at the bottom of the tablet
How to update your Honor phone online
This update method is the simplest and most accessible. The owner of the smartphone does not even need to download the firmware file from the manufacturer’s official website. The fact is that updates can be installed online, which involves automatically downloading the latest EMUI.
To install the firmware you will need:
Open device settings.
Go to the “System” section.
Click on “System Update”.
Click the “Check for updates” button.
After completing these simple steps, the system will start looking for updates.
Phones will no longer be supported by the manufacturer over time. Therefore, the latest versions of the operating system are not available on older devices.
As soon as the search for updates ends, the owner will see the inscription “New version” on the smartphone screen.
The owner of the smartphone is required to press this button. Next, the firmware download will begin. You can monitor your progress by looking at the round scale. For the fastest possible download, it is recommended to connect to Wi-Fi. This will also help avoid additional expenses due to mobile traffic.
The update process does not end here. If the owner wants to install the latest firmware now, you need to click the “Reboot now” button. You can also set up the installation overnight or the next day.
Selecting “Restart now” will immediately turn off the device. The update will be carried out in this mode. After the process is completed, the device will turn on, and the owner will be able to use the new Android and MIUI functions.
How to unlock bootloader
Manual for obtaining the bootloader unlock code on the Huawei website.1. Collecting information about the device Huawei S10-101u MediaPad 10 FHD— IMEI: **************— Device serial number (S/N): ************ ***— Product ID: ******** can be found using the “Huawei unlocker”2 program.
How to unlock the bootloader without any registration on the official website and using Huawei voice technical support:1. Call 8-800-700-16062. Press the key with the number “6” and a Russian-speaking person will answer you.3. Start talking about getting the bootloader unlock code.4. You will be asked:
— contact number
– email address to which the unlock code will be sent
— IMEI of the device
— Device serial number
Then they said that “wait” and a code will be sent to your email.
In order not to register on the site, to unlock, you can use the link to the page that opens when you click in Huawei Hacker Toolkit: Tools – Bootloader – Request Key. A form will open to fill out in Chinese.
After clicking on the green button, we will receive our code in the orange field.
Attention! If your tablet reboots spontaneously, then carefully study the contents of the “Play Market” spoiler, or follow the following recommendations:
You need root (framaroot installs in one click). Next, according to the standard scheme, drop the attached file into system/lib using an es type explorer, set the permissions to the same as others in this folder (rw-r—r—). Reboot. All. At first he may swear – reboot the animal, first clean problematic applications to their original state, then you can update. Unpack the archive, the treasured file is lib.mali.so.
List of utilities:
Root, repair, downgrade (RRD) – a utility for restoring a tablet from a “bricked” state
RASHR – a utility for flashing/backing up custom kernels and recovery directly from Android
Android SDK Tools — a set of utilities for working with the Android platform
MyPhoneExplorer — one of the best utilities for managing and synchronizing with a PC
HiSuite – a utility for synchronization, backup and much more from Huawei
Cloud — Cloud service from Huawei
Huawei Update MultiLoader Tool 1.0.0.9 — Utility for flashing tablet firmware from PC
Huawei Update Extractor — Utility for unpacking/repacking official Huawei firmware
Kitchen for Linux — Utility for unpacking/repacking official Huawei firmware
The official website with Huawei mediapad 10 firmware is here.
Huawei mediapad 10 service manual – here
How to find out the current firmware version
Before we talk about ways to check the current firmware version, we need to make an important clarification about the Android operating system on Honor and Huawei phones. Although these devices are indeed based on Android, they have a proprietary shell on top.
Until recently, Honor and Huawei devices used EMUI firmware. But at the end of 2020, it was replaced by MagicUI. Old devices are still based on EMUI, so switching to the new shell is impossible.
Well, now about the most important thing. How can I find out the firmware version that is currently installed on my phone? The operation is quite easy to perform with Honor’s built-in tools. The smartphone owner needs:
Open settings.
Go to the “System” section.
Click on the “About phone” item.
In the mentioned section, the user will find two important columns. One indicates the Android version, and the other indicates EMUI (MagicUI). Don’t be afraid that they don’t match. This is a normal phenomenon, since Android appeared much earlier than the Chinese shell.
When buying Honor smartphones in 2020, keep in mind the fact that new models do not support Google services.
The version of the operating system can tell a lot to the owner of a smartphone. For example, whether he is currently using the most up-to-date software. For some people, this is the most important factor influencing the possible purchase of a new smartphone.
Update with hisuite:
Download, install and update to the latest version the HiSuite program — a utility for synchronization, backup and much more from Huawei (contains ADB drivers).
To further flash the phone firmware, enable USB debugging in the phone settings in the developer section.
Launch the HiSuite program on your computer.
Connect the phone using a USB cable in HiSuite mode.
When you first connect, HiSuite begins installing drivers on your computer and Daemon on your phone. (a shortcut to the HiSuite program will appear on the phone – this tells us that the drivers have been installed successfully).
Select the EMUI ROM item in the HiSuite program.
If we DO NOT have a pre-downloaded firmware version, then select the Download ROM item, follow the link and download the required firmware version from the website. If we HAVE, or you have just downloaded it, a firmware version, then select the Loading ROM item, we will be prompted to select the location of the firmware file. We find the file and confirm the choice.
The file download process begins.
We are offered to save our phone data. Select the necessary backup items, if necessary, and confirm the selection. Or we refuse if we think that we already have saved data. After saving or refusing, select NEXT.
The HiSuite program begins the firmware process.
Important!
During the firmware process, do not disconnect the cable from either the phone or the computer.
Don’t touch the phone at all.
Do not switch to other processes on your computer.
Wait for the firmware to finish.
After flashing the HiSuite program, the phone will reboot and enter Recovery mode. A message will appear on the white screen indicating that the phone itself has started flashing the firmware.
We wait for the successful completion of the firmware in the form of a tick. The phone will reboot itself.
Turn off the phone and see a window on it about updating applications. We are waiting for the operation to complete.
Go to the settings and in the update item we make sure of the version we have installed.
Huawei emui and magic ui security updates | Huawei support Russia
Official website of huawei modem assemblies – huawei firmware
This page contains firmware ( Firmware* ) for popular modems HUAWEI .
How to find out what firmware version you have in your modem . Instructions for firmware for HUAWEI mobile modems (old firmware version)
Instructions for firmware for HUAWEI mobile modems (new firmware version)
Discuss firmware for HUAWEI modems on the forum.
Dear users, flash your modem only with the firmware that matches your modem model. You perform all actions with your modem at your own peril and risk, I am not responsible for damage to your modem due to unsuccessful firmware.
HUAWEI E150 . Version E150Update11.609.82.02.143. B427 download from File hosting.rf
or Yandex Disk
HUAWEI E153 . Version E153Update11.609.18.00.00. B427 download from File hosting.rf
or Yandex Disk
HUAWEI E1550 . Version E1550Update11.609.18.00.00. B418 download from File hosting.rf
or Yandex Disk
HUAWEI E1550 . Version E1550Update11.609.20.00.00. B418 download from File hosting.rf
or Yandex Disk
( Attention! A modem with this firmware may not work with some SIM cards of an older revision )
HUAWEI E156 . Version E156Update11.609.10.00.264. B409 download from File hosting.rf
or Yandex Disk
HUAWEI E160 . Version E160Update11.609.10.02.432. B418 download from File hosting.rf
or Yandex Disk
HUAWEI E169 . Version E169Update11.315.05.00.00. B418 download from File hosting.rf
or Yandex Disk
HUAWEI E173 . Version E173Update11.126.85.00.209. B427 download from File hosting.rf
or Yandex Disk
HUAWEI E1750 . Version E175XUpdate11.126.13.00.00. B418 download from File hosting.rf
or Yandex Disk
HUAWEI E1750 . Version E1750Update11.126.16.01.209. B427 download from File hosting.rf
or Yandex Disk
HUAWEI E1820 . Version E182XUpdate11.831.06.01.464. B427 download from File hosting.rf
or Yandex Disk
HUAWEI E1820 . Version E1820Update11.828.08.00.00. B427 download from File hosting.rf
or Yandex Disk
HUAWEI E219 . Version E219Update11.310.16.13.00. B409 download from File hosting.rf
or Yandex Disk
HUAWEI E220 . Version E220Update11.313.02.00.01. B268 download from File hosting.rf
or Yandex Disk
HUAWEI E3131 . Version E3131Update21.158.00.00.1020. B757 download from File hosting.rf
or Yandex Disk
HUAWEI E3531 . Version E3531s-6 Update21.318.05.00.00 download from File hosting.rf
or Yandex Disk
( This firmware does not support voice calls )
HUAWEI E3531 . Version E3531s-1 Update21.318.29.00.769 download from File hosting.rf
or Yandex Disk
( This firmware supports voice calls )
HUAWEI E367 . Version E367MDM8200Update11.810.09.20.00. B726 download from File hosting.rf
or Yandex Disk
Firmware* (firmware) is software built (“hardwired”) into a hardware device. Often represented as a firmware image file that can be loaded into the hardware.
Dear users, if your modem works with a SIM card from only one operator, then after updating the Firmware it will not work with any SIM cards. In order for the modem to work with SIM cards of any operator, it must be unlocked (unlocked). (An exception is the E3131 modem from Beeline Russia, it is unlocked after flashing Firmware. ) How to unlock (unlock) the modem, read in the forum thread: Unlocking (unlocking) HUAWEI modems and routers
More information about firmware versions:
So, let’s take a look at the firmware numbering for Huawei smartphones. For example, let’s take the firmware from Huawei Ascend Mate – MT1-U06 V100R001C00B907.
As you probably guessed, MT1-U06 is the name of the device. M T1 is the main base, that is, Huawei Mate, U06 is a revision of the device. Devices come in different revisions, in this post I will not go into details of their designation, I will only say that the letter U is UMTS (regular 3G), and the letter C is the CDMA version. Devices with revision MT1-U06 are supplied to Russia.
CxxBxxxSPxx – This is the most important option in the firmware, it shows on which version of the “base” the firmware is compiled Bxxx – the numerical class of the base for the SPxx firmware – Service Pack number. The higher Bxxx and SPxx, the newer the firmware. (Bxxx has higher priority than SPxx). Cxx is a region of the country.
Next, let’s look at the firmware version itself – V100R001C00B907. V100 and R001 are the main version and firmware revision. They change in very rare cases, when there is a big change compared to the previous firmware version (for example, the transition from Android 2.x to 4.x). Even within Android 4.x versions, these values usually do not change.
C00B907 – for most new devices, the value of C00 no longer changes, and in general it means binding to the region. Now the region can be determined in the “Special version” menu item – CUSTC10B907.
So, for smartphones, the Russia region (channel/ru) is CUSTC10. The binding to the region can easily be changed with a special firmware file; in some official firmware there is an update.app file in the cust folder weighing several megabytes or kilobytes, which changes the region to Russia.
B907 – the firmware version itself. I think there is no need to explain that the higher it is, the newer the firmware.
Firmware for Huawei mediapad 10 fhd tablet
Installing the system using CWM Recovery 1. Charge the tablet being flashed to at least 80% . 2. We save all data that cannot be lost from a flash drive, SIM card and tablet memory. The SIM card (if any) can be removed. 3. We place the necessary firmware in the tablet’s memory. The firmware file must be in archive format zip . You can select and download the firmware here . 4. All Huawei tablets have Recovery from the manufacturer, so we change it to ClockWorkMod Recovery . We do this according to the following instructions:
• Install the application [ROOT] Rashr – Flash Tool on your tablet from Google Play.
• Launch it and grant Root rights. .
• In the list of options, select “CWM Recovery”.
• Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons).
• You will be prompted to download. Click Yes.
• Then the CWM Recovery image for the tablet will begin downloading.
• A notification will appear that the firmware was successful and you now have a modified recovery installed. We immediately go into it, to do this, click “Yes”.
• Ready.
If you have already installed ClockworkMod Recovery, then simply enter it by pressing any of the combinations for 3-5 seconds:
— Volume up power button — Volume down power button — Volume up/down power button “Home” — Volume up volume down power button 5. Movement in the Recovery menu is carried out using the volume buttons, and confirmation of the choice with the power button.
Before installing the firmware, you must first do a factory reset.
Therefore, in the menu, select the item wipe data/factory reset .
6. Next, simply confirm that you agree to reset: Yes – Wipe all user data . 7. Now in the main menu of Recovery select install zip . 8. After that select Choose zip from /sdcard . 9. Navigate to the folder where you saved the firmware zip file and select it. 10. A confirmation message will appear. Select Yes – Install… . 11. The firmware installation process will begin and at the end the message Install from sdcard complete will appear . The firmware is finished. We return to the main menu of CWM Recovery and reboot the tablet.
To do this, select reboot system now .
12. Ready. The tablet will start loading from the already installed firmware.
Other materials Attention! You perform any actions at your own risk. You should not reinstall the system without a reason.
If you have any questions, ask them – on the forum .
MODELS
Here is detailed step-by-step instructions on how to flash a Huawei MediaPad 10 FHD tablet. Our editors have chosen the most suitable method for flashing the firmware for this Huawei model. If this instruction does not give any result try flashing using another method: TWRP Recovery , ROM Manager , Fastboot or classic OTA .
Warning! After flashing the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.
Technical characteristics of mediapad
The company’s strategy is clearly aimed at successful trading and promotion in the mobile technology market. Their Huawei s7 tablet is literally “pressed” with powerful parts – which makes it possible to classify it as a flagship product, but the price – on the contrary, shows that it belongs to the middle class.
So, the first thing the user sees is a 7-inch display with an IPS matrix and FullHD resolution of 1280×800 WXGA (display density – 217 ppi). The display brightness, if necessary, can reach a value of 276 cd/m2, and to save energy it can be reduced to 14 cd/m2.
Based on the price category, the tablet is equipped with a fairly powerful Qualcomm Snapdragon MSM8260 processor. The processor has two cores, each core runs at 1.2 GHz. The well-proven GPU Adreno 220 graphics processor, also from Qualcomm, is responsible for processing the information (pictures) arriving on the screen, and especially 3D graphics data.
For such a processor, OS Android 3.2 is not the newest, but recently it became possible to update it to 4.0.3 ICS. For the fast operation of the operating system, 1 GB of LPDDR2 RAM with a frequency of 266 MHz is responsible, of which 128 MB is allocated for processing graphics data by the Adreno processor.
Like all Chinese products, the mediapad tablet is equipped with a small amount of internal permanent memory – only 8 GB (5.8 GB available), but it is possible to use microSD cards up to 32 GB.
