Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

dfeba Notice: Undefined offset: 0 in /home/m/mastereh/huaweidevices.ru/public_html/wp-content/themes/reboot/vendor/wpshop/core/src/Template.php on line 251 Notice: Trying to get property 'cat_ID' of non-object in /home/m/mastereh/huaweidevices.ru/public_html/wp-content/themes/reboot/vendor/wpshop/core/src/Template.php on line 251

In order to install any original firmware, you must do the following:

  1. Copy the dload folder with all its contents to the root of the SD card;
  2. Turn off the tablet;
  3. Insert the SD card if it was removed;
  4. While holding the Volume Up key, press and hold the Power button until the screen blinks. The Volume Up button must be held until the installation process begins (a green robot and a progress bar will appear);
  5. Finally, when prompted, remove the SD card or hold the Power button for 10 seconds.

Note: In some cases, you don’t need to press the buttons at all and the process will start automatically after turning on/rebooting.

If the update process does not start, you need to open the calculator, enter ()()2846579()()= and then select Project Menu Act -> Upgrade ->SD Card upgrade.

Attention!

  • Do not remove the card or press the power button until the process is completed and the corresponding prompt appears on the screen;
  • If the power is lost during the installation process, repeat the firmware process;
  • After copying the firmware to the SD card, check if it is damaged (copy the firmware files, disconnect and then connect the SD card, check that the *.zip files in the firmware open without errors on the computer).
  • Delete the firmware file from the SD card or rename the dload folder if you don’t want to accidentally update your tablet again!

: Huawei named 67 smartphones that will receive emui 11 on Android 10 – full list and timing

Apparently, the smartphone market will experience big changes in 2021. As reported, next year HUAWEI will begin transferring current devices to the new Harmony OS operating system. It will be built on its own engine, which means there can be no talk of any support for the Google store. All this will deprive the search giant of an impressive amount of money. After all, several tens of millions of phones from the Chinese manufacturer still run official versions of Android 9 and 10.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Most likely this will happen in the second half of 2021, since right now there is mass testing of the latest version of the EMUI 11 firmware, based on Android 10. Unfortunately, Google banned the use of the new Android 11, which was the last straw that forced HUAWEI to refuse from the American ecosystem. Since the OS version remained the same, the Chinese company decided to update a considerable 67 smartphones to EMUI 11. Their list is below.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

As you can see, there are flagships from 2020 to brand new phones in 2020. Insiders advise not to look at whether there is official confirmation of the release of the firmware, since it has already been repeatedly indicated that the development of the first closed builds for these devices has begun. Below you can see the deadlines. The bottom line is that at the moment, many owners of expensive 2020 devices can get the stable beta version over the air. Presumably, the following series will receive the final firmware before the end: P40, Mate 30, Mate 40, Nova 6/7 and many others.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

: Huawei honor 10 owners received the long-awaited update to emui 10

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Owners of Huawei Honor 10 smartphones outside China have begun to receive the long-awaited Emotion UI update. Chinese versions of the Honor 10 smartphone received an update to EMUI and Android to version 10 quite a long time ago. The first official update, numbered 10.0.0.156, was distributed to Chinese devices Honor 10 COL-AL10 and COL-TL10 at the beginning of the year, and in May, smartphones received another update, numbered 10.0.0.178. All this time, there was no information about the distribution of the update to devices in other regions. The official update plans presented on the Huawei website in April and May also do not include the Honor 10 smartphone, however, there are also local plans for each region on the Internet, which may differ slightly.

Honor 10 owners in the Middle East region were the first to talk about the update. Region-specific devices are coded C-185 and receive update 10.0.0.177 (C185E3R1P4). Later, the update was reported in Ireland, Belarus, Russia and Central Asia. Global distribution of EMUI 10 has begun for Honor 10 smartphones.

The update is available through the HiCare support application and for Russia it is codenamed C10E4R1P4. The update is distributed in waves, so not all users will receive the update at the same time.

Huawei Honor 10 was introduced in 2020. The model featured an elegant and compact design, a bright and impressive display and excellent hardware, led by the HiSilicon Kirin 970, which combines 8 4xCortex-A73 4xCortex-A53 computing cores and a Mali G72MP12 graphics chip.

In “device manager”

“Device Manager” is a Windows tool that allows you to directly manage all computer devices, both external and integrated. Through it, the microphone can actually be physically disabled to definitely avoid bypass by malware or attackers.

In versions of Windows earlier than the tenth “Manager” you can find it by searching among programs in the “Start” menu.

  1. In Windows 10, you can just right-click on the Start icon and select Device Manager from the list of tools.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Right-click on the “Start” icon and select “Device Manager”

  2. The main menu of Device Manager organizes your computer components into general categories. Here you can find almost every component of your device. The microphone is located in the Audio Inputs and Outputs category. Expand the category and select the desired device from the list, which will be labeled as “Microphone”. Right-click to launch the context menu and select “Disable”.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Right-click to launch the context menu and select “Disable”

  3. The system will display a dialog box in which you must confirm turning off the component.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Click “Yes” to disable the active component

Done!

Device Manager can also be opened using the Run tool. To do this, press the key combination “Win” (Windows logo key) and “R”. In the window that appears, in the command line you need to type “devmgmt.msc” and click “OK”. Manager will open immediately.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


To open the “Device Manager” in the “Run” window, type the command devmgmt.msc and click “OK”

  • How to check the microphone on Windows 10

In the special section “recording devices”

The easiest and fastest way to mute the microphone, which works for all versions of Windows. The settings for this option are right at hand at any time.

  1. Just find the volume control icon in the bottom panel and call up the context menu for it by right-clicking. Among other options, you must select “Recording Devices”.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Select the item “Recording devices”

  2. A small window will open for setting all parameters related to receiving and playing sounds. Here you need to go to the “Recording” tab, in which the active microphone will be the top device. Right-click on it and select “Disable”. Click “Ok” at the bottom of the window.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Click “Ok”

If you need to reactivate the built-in microphone, you can do this in the same menu.

Note!
However, in some cases, devices that are currently disabled no longer appear in the search results.

Then you need to call up the context menu by clicking on an empty area of ​​the window and check the box next to the “Show disabled devices” item.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


Check the box next to “Show disabled devices”

Find out how to turn off the camera with detailed instructions from the new article – “How to turn off the camera on a laptop.”

Manually via recovery mode

This option is similar to the previous method due to the fact that the firmware file must first be downloaded to the phone. But otherwise the process will be very different, since installation will require going to the engineering menu (Recovery Mode).

To go into recovery, you need to turn off the device and hold down the power button and the top volume rocker for a few seconds. If nothing happens, you should change the combination to the power button and the bottom rocker.

Provided that everything is done correctly, the recovery menu will light up on the screen. To navigate it, use the volume buttons, and confirm the action by pressing the power button.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

You need to select “Reboot system now” if you want to update over the air. The “Apply update from ADB” parameter is responsible for installing the firmware from the internal storage, and the “Apply update from SD card” parameter is responsible for installing the firmware from the memory card. Having selected the appropriate item, all that remains is to confirm the operation and wait for the process to complete.

Emui 10 release date

On August 9, 2020, exactly according to the announcements, Huawei launched their interpretation of Android 10. It was promised that the pioneers who tried out this version of the shell would be premium smartphones Huawei P30 Pro, Huawei Mate 30 and Mate 30 Pro. And so it happened. We offer a short review on the topic: what innovations do the guys from Shenzhen offer us in their product? Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

The interface for users of the new EMUI has become smoother. The edges of the screen and icon icons have become rounded. The animation and fonts are also not as angular as before. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Dark mode. It could be classified as an interface, but it is interesting enough to be highlighted separately. So, it can now be applied not only to standard applications, but also to programs installed by the user. The developers have tried very hard so that even in third-party software, when using the new mode, the application that is familiar and convenient to you does not “float”. In other words, dark mode adapts well to all applications.

Universal synchronization. The latest update pays enough attention to the interaction of the device on EMUI 10 with other members of the Huawei ecosystem. The user will receive access to all of his devices of this brand. From the now mainstream unmanned drones to Bluetooth speakers, everything works consistently and perfectly. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Synchronization with personal computers is also at a high level. Transfer the files you need to or from your computer, or create a virtual screen of your smartphone on your laptop monitor to play mobile games on a larger display. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Working with artificial intelligence. With this pretentious name, Huawei dubbed the ability of your smartphone’s software to remember which applications you launch most often, so that later it can supply more power to them. This, in turn, leads to the fact that your favorite programs launch faster and work without unnecessary glitches. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Auto mode. Following the canonical Android Auto, Chinese developers came up with their own auto mode for EMUI 10 – HiCar. With it, you can control the climate control in your car through your gadget, scroll through songs in the car audio system and manage navigation.

If the owner has forgotten the graphic key

How to unlock an Honor phone on Android if the pattern key is lost? Графический ключ


To do this, you need to choose one of the proven methods:

  1. Through a Google account, when if you repeatedly enter the wrong code, a button appears to restore data and unlock your smartphone.
  2. On new operating systems, a complete “zeroing” is used. The disadvantage of this method is that you will have to restore all the information again.

If you can’t remember your password, you can delete the folder with your personal files.
It is not possible to delete data individually. Exit – reset to factory settings with complete deletion of existing information, including photos and videos. Save the data to the memory card or PC, then reset the phone to factory settings.

Instructions for installing the beta version of emui 10

And here we will tell you how you can “travel”
beta version of the shell on your smartphone. Give her a test before they screw her up
Huawei engineers and you will be offered to install an already completely stable product. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

To begin, you will need to log into your Huawei account. (Settings-Login via Huawei account) If it did not exist before today, you will have to create it. Your phone number or email address will be enough for this. Next, go to the application that appears there. Let’s get acquainted with digital documentation. Tap on “acquainted”
and “accept”
. You are now a beta testing participant. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Next, go to the Huawei account menu in the personal section. We select the “join a project” tab there, and there is already “available project”. We are registering for beta testing. Then, if you did everything correctly, you will receive a notification on your smartphone that a new version of the shell is available. All that remains is to install what is offered and use it.

To summarize, we can say that the new EMUI promises to be a very interesting solution in the smartphone market. Stylish enough to confidently “walk the catwalk” next to Android shells from Samsung, Xiaomi and Meizu. Smart enough to help you interact better with the programs you need.

How to turn on speakerphone on an android smartphone?

The speakerphone function is very convenient if, for example, you want everyone around you to hear the call. Of course, this functionality is also supported by smartphones based on the Android operating system. In this article we will tell you how to turn on the speakerphone. The Samsung Galaxy is used as an example; on other devices the functionality is enabled in exactly the same way.

Open the Phone application.

Select the person and press call, for example:

On the screen you will see several touch buttons, including “Speaker” (it may also be called “Microphone”). Click on the button.

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


It has changed color, and you hear the sound from the smartphone speaker.

When there is an incoming call, you can turn on the speaker after answering the call.

As you can see, everything is simple. If, when you press a button, you do not hear any sound from the speaker, try restarting your smartphone – it may have crashed. In some cases, the device needs to be re-flashed, and if the speaker is broken, repaired.

source

How to adjust the microphone volume on a smartphone

If increasing the sensitivity does not have a significant effect, you can try adjusting the volume of the sound transmitted through the built-in microphone. First, you should make sure that the device is working properly. Check its integrity; If water gets into your phone, dry it.

If all of the above did not help resolve the problem, do not rush to send the equipment for repair: there is a way to solve the problem using system settings. In this case, you will need to perform the following manipulations:

  1. Go to the engineering menu as described above. For standard systems, you can use the USSD protocol; in non-standard versions, find the appropriate code on the Internet to activate the menu.
  2. Move the main window to the right to get to the corresponding Hardware Testing section, where the main volume level adjustment will be made.
  3. As with sensitivity, select the Audio section and click on Normal Mode.
  4. In the Type line, select the Mic section to select interaction with the microphone system.
  5. Adjust the volume to a suitable level and save your changes, then restart your phone and check the sound quality.

In order to achieve the optimal volume level, perform the manipulation several times, adjusting the outgoing sound settings. At the same time, check the sound quality using a regular call.

If the settings did not help solve the situation, most likely you will have to solve the issue mechanically. If you doubt your abilities, you should consult a specialist. If you repair or replace parts yourself, the warranty will not be valid.

How to open the engineering menu?

For convenient access to the engineering menu, the developers have provided a system of access codes. All you need to do is enter the desired combination of numbers and special characters on your gadget.

The menu will open automatically.

There are two ways to enter the engineering menu:

  • Using code;
  • Using third-party utilities.

The engineering configurations interface resembles a regular settings window
. In 90% of cases, this menu is in English, so before setting any parameter, make sure that you understand which parameter you are changing. Since the menu allows you to configure more than a hundred functions, you can easily forget which window you were just working in.
Be careful.

Follow the instructions to open the menu using the code:

  • Open the window “Call”
    . Since you dial the user’s number when trying to dial, also dial the system code to call the engineering settings
    .;
  • Press the handset key to open the settings.
    If you use the wrong code, the system will notify you that the attempt was unsuccessful.

Fig.6 – example of an access code

Where can I get the code? The combination of numbers and symbols differs depending on the OS version or device brand used. The table shows the most common access codes:

Gadget brand: Code:

Sony *#*#7378423#*#*
Huawei *#*#2846579#*#*
Philips, Alcatel, Fly *#*#3646633#*#*
HTC *#*#4636#*#* (another option is *#*#3424#*#*, and also *#*#8255#*#*)
Lenovo ####1111#
Samsung *#*#4636#*#* and *#*#8255#*#* (depending on generation)
Meizu *#*#3646633#*#*
Xiaomi *#*#6484#*#* or *#*#4636#*#*

Please note!
For all gadgets with an MTK processor of any generation, there is a single code – *#*#54298#*#*
or the combination *#*#3646633#*#*.

How to unlock honor via google account

Algorithm for unlocking an Honor phone using Google services:

  1. Enter the wrong unlock password 3 times in a row .
  2. The window “Emergency call” or “Forgot your password” will appear.
    Вводим не верный пароль

  3. Enter your Google account details and confirm the information.

How to install emui 10 / magic ui 3 right now without waiting in line / smartphones and mobile phones / ixbt live

Huawei is now rolling out Android 10 with the EMUI 10 shell (Magic UI 3 for Honor) on several of its models. But as always, for some the update arrives earlier, and for others later. I accidentally discovered a way to skip the queue, and tested it on two Honor 20 and one Honor 20 Pro – it works everywhere.

If you go to “Settings” – “System” – “Software Update” and click “Check for updates”, the smartphone claims that the installed system version 9.1.0.166 with Magic UI 2.1.0 is the latest, and there is nothing newer . But that’s not true.

If you go to the HiCare application (you need to update it to the latest version from Google Play or App Gallery!) and in the “Update” section click “Check for updates”, then suddenly a new version 10.0.0.168 is discovered – the very tenth Android with Magic UI 3. Moreover, if you return to the usual “Settings” and check again, the line about the available update will disappear!

How to update:

After update:

Huawei and all update instructions on the Internet suggest system updater and HiCare as equivalent update methods. In fact, Huawei rates users of its service app a little higher.

Huawei honor 8s (2020) codes, show more – huaweidevices.ru

Here you can find all secret codes
for HUAWEI Honor 8S (2020). Find out how to enter hidden mode
and use additional functions
Android 9.0 Pie. Let’s get access to secret information
about HUAWEI Honor 8S (2020). Click here for more detailed information about seret codes.

  1. Project menu
    *#*#2846579#*#*
  2. About the phone
    *#*#0000#*#*
  3. Calendar storage
    *#*#225#*#*
  4. FCM Diagnostics
    *#*#426#*#*
  5. IMEI Info
    *#06#
  1. Let’s *#*#2846579#*#*
    to open project menu
    to access background settings, information about *#*#2846579#*#*
    network information, software updates, factory reset, battery charge.
  2. If you would like to access advanced settings of your HUAWEI Honor 8S (2020) such as options
    for developers,
    and then put *#*#0000#*#* ,

    where you can find Model, Build Number, Hardware Version, IMEI1, IMEI2, MSPL Version, MLPL Version, ICCID. About phone HUAWEI Honor 8S (2020)
  3. Write *#*#225#*#*
    to freely receive the translation into the storage of your Calendar,
    where you can find out the dates of your holidays, important birthdays, anniversaries, trips, etc. Calendar info HUAWEI Honor 8S (2020)
  4. Place *#*#426#*#*
    to open FCM Diagnostic,
    where you have the opportunity to find out information about the connection to the server and the connected network. You will also be able to use the Events button.
  5. Did you know that your unique IMEI number
    allows you to get all the information about your HUAWEI Honor 8S (2020), you can also use the amazing features that our web offers
    website IMEI. INFO
    . Let’s dial *#06#
    to reveal the location of your 15-day number IMEI. Imei check HUAWEI Honor 8S (2020)


Huawei mate line

And here are the icing on the cake. Premium series, in all its beauty. We welcome the following updated elite versions of Huawei: Mate 10, Mate 10 Pro, Porsche Design Mate 10, Porsche Design Mate RS, Mate X, Mate 20 Lite, Mate 20, Mate 20 Pro, Mate 20 Porsche RS, Mate 20 X. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Huawei p line

This list contains a list of Huawei P20 smartphones. Here, in particular, we see that EMUI 10 has become available for Huawei P30. All updates present here are officially confirmed. So, here they are, these models: P Smart Z, P Smart 2020, P Smart (2020), P20 Pro and, of course, P30 Lite/Nova 4e, P30, Huawei P30 Pro. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

My interlocutors can’t hear me on speakerphone in honor, Huawei

What is the main, main function of any phone? Providing the ability to communicate by voice with another person. In mobile devices, this functionality has been slightly expanded, offering an additional feature in the form of so-called speakerphone. It is more convenient to use often. Especially when it is not possible to pick up the phone because they are busy. Therefore, if a request for help appears on the Internet, “The people I’m talking to on speakerphone can’t hear me,” then this is really quite a serious problem for the owner of a modern smartphone.

Is there a solution to this problem? In this article, we will analyze the situation when the speakerphone stopped functioning on mobile phones produced under the Huawei and Honor brands.

So, what to do?

First of all, it is recommended to evaluate the condition of the microphone, which is used to provide hands-free functionality:

  • Check that the microphone through which you are speaking is not blocked by anything;
  • When using this functionality, it is advisable to be as close to the device as possible – distance plays a role!;
  • If you use a case on your mobile phone, its elements should not block access to the microphone. Therefore, it is always recommended to use only branded cases;
  • Visually inspect the area where the microphone is located. It may be clogged with dirt, other objects or dust. If so, gently clean it with a soft-bristled brush.

If the recommendations described above did not help in achieving your goal, then it’s time to move on to software methods. The first one is diagnostics:

At the next stage we reset some telephone settings:

When everything is ready, restart the mobile device and call someone to check the result.

If it is negative, then, unfortunately, there is most likely some kind of hardware damage in the phone. It can only be fixed at the manufacturer’s service center.

Is it possible to restore access without losing data?

If you are interested in the question of how to unlock the PIN code of an Honor phone without canceling your data, be prepared for the fact that it is impossible
. This option is available only on early versions of smartphones with EMUI. It disappeared from version 9 because the manufacturers did not provide for the presence of a button. The only option is to radically reset files through the “Recovery” program
. Программа Recovery mode

Adjusting the microphone volume through the engineering menu

You can change the microphone settings in the Android engineering menu by gaining access using a special code. This code is different for different brands of smartphones. You can find it in the technical documentation for the devices or on the official website of the device manufacturer.

To enter the engineering menu, you need to press the call button, enter (in the phone number field) the appropriate code and press the call key. After these steps, the engineering menu will launch.

A system application with various items will appear on the screen. The interface differs depending on the Android version. You need to find the “Audio” item (or containing this word).

  • How to connect a microphone to a computer and adjust the volume

By entering this section, the following sub-items will become available:

  • Normal Mode – speaker sound, without using a headset;
  • Headset Mode – sound level in headphones;
  • Loud Speaker Mode – sound parameters in speakerphone mode;
  • Headset_ Loud Speaker Mode – sound settings when talking in headphones;
  • Debug Info – is responsible for restoring factory settings.

We recommend: Setting up two SIM cards on an Android smartphone

Each mode will be represented by two digit values ​​- the current volume level and the maximum possible. Accordingly, the first indicator can be increased to the level of the second. Having set the required sound level in the selected menu sub-item, you need to press the Set key.

It is important to remember that manufacturers do not intentionally set the maximum sound level. High volume levels have a negative impact on the user’s health and shorten the service life of the device itself.

Setting sensitivity through the engineering menu

Before setting the sensitivity, you need to understand the meaning of the abbreviations in the engineering menu:

  • Sip – is responsible for setting up online calls;
  • Mic – contains microphone settings;
  • Sph/Sph2 – speaker settings;
  • Sid – adjusting the sound of your voice during a conversation (it is recommended not to change);
  • Media – sound parameters for multimedia files.

To change the fine parameters of the microphone, you need to go to the Mic sub-item. In the Level section, you need to click on the sixth position and remember the Value indicator (this is important).

Then select the remaining levels and enter into them the indicator that you remember. At this point, the sensitivity adjustment can be considered complete. After this procedure, the sounds in the smartphone will be clear and intelligible.

  • How to connect a microphone to a computer (Windows 7): for Skype, karaoke

It is worth noting that enthusiastic programmers have come up with a third way to increase the microphone volume on the phone by inventing and creating patches. However, this method is only available to advanced users, and can cause a lot of damage to the device if it is used incorrectly or the quality of the patch itself is poor. Therefore, we miss this method.

Update with hisuite:

  1. Download, install and update to the latest version the HiSuite program
    — a utility for synchronization, backup and much more from Huawei (contains ADB drivers).
  2. To further flash the phone firmware, enable USB debugging in the phone settings in the developer section.
  3. Launch the HiSuite program on your computer.
  4. We connect the phone using a USB cable in HiSuite mode.
  5. When you first connect, HiSuite begins installing drivers on your computer and Daemon on your phone. (a shortcut to the HiSuite program will appear on the phone – this tells us that the drivers have been installed successfully).
  6. Select the EMUI ROM item in the HiSuite program.
  7. If we DO NOT have a pre-downloaded firmware version, then select the Download ROM item, follow the link and download the required firmware version from the website.
    If we HAVE, or you have just downloaded it, a firmware version, then select the Loading ROM item, we will be prompted to select the location of the firmware file. We find the file and confirm the choice.
  8. The file download process begins.
  9. We are offered to save our phone data. Select the necessary backup items, if necessary, and confirm the selection. Or we refuse if we think that we already have saved data. After saving or refusing, select NEXT.
  10. The HiSuite program begins the firmware process.

Important!

  • During the firmware process, do not disconnect the cable from either the phone or the computer.
  • Don’t touch the phone at all.
  • Do not switch to other processes on your computer.
  •  Wait for the firmware to finish.
  • After flashing the HiSuite program, the phone will reboot and enter Recovery mode. A message will appear on the white screen indicating that the phone itself has started flashing the firmware.
  • We wait for the successful completion of the firmware in the form of a tick. The phone will reboot itself.
  • Turn off the phone and see a window on it about updating applications. We are waiting for the operation to complete.
  • Go to the settings and in the update item we make sure of the version we have installed.

Preparatory stage

Despite the fact that each subsequent firmware version brings a lot of new functions, after the update some smartphones are unstable. This happens when the user ignores the preparation step.

https://www.youtube.com/watch?v=hb15ZlixZC8

Before installing updates on Huawei Honor 10i, you need to meet 2 basic requirements:

And if everything is clear with the first point, then the second raises many questions for some people. Resetting to factory settings completely deletes files from the smartphone’s memory. This allows you to avoid errors when installing updates.

Of course, no one wants to lose personal data, so you need to create a backup before resetting:

  1. Open settings.
  2. Go to the “Storage and Backups” section.
  3. Click on the Google Drive heading. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.
  4. Activate saving a backup copy.

Performing these actions will result in the backup file being uploaded to cloud storage. After updating Android, it can be restored.

If there is not enough space on Google Drive to save all the data, it is recommended to create a backup copy through the “Copy and Restore” item. The resulting file should be moved to another device (for example, a computer) during the flashing process, and after the process is completed, return it back to the phone’s memory.

If the backup has been successfully created, you can safely proceed to restoring the phone to factory settings:

  1. Launch device settings.
  2. Go to the “Backup and Reset” section.
  3. Select “Reset settings”. Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.
  4. Click the “Reset Phone” button.
  5. Confirm the operation.

Now you need to reboot your smartphone, and then go directly to the process of installing the new firmware.

More information about firmware versions:

So, let’s take a look at the firmware numbering of Huawei smartphones. For example, let’s take the firmware from Huawei Ascend Mate – MT1-U06 V100R001C00B907.

As you probably guessed, MT1-U06 is the name of the device. M T1 is the main base, that is, Huawei Mate, U06 is a revision of the device. Devices come in different revisions, in this post I will not go into details of their designation, I will only say that the letter U is UMTS (regular 3G), and the letter C is the CDMA version. Devices with revision MT1-U06 are supplied to Russia.

CxxBxxxSPxx – This is the most important option in the firmware, it shows which version of the “base” the firmware is built on. Bxxx – the numerical class of the base for the SPxx firmware – Service Pack number. The higher Bxxx and SPxx, the newer the firmware. (Bxxx has higher priority than SPxx). Cxx is a region of the country.

Next, let’s look at the firmware version itself – V100R001C00B907. V100 and R001 are the main version and firmware revision. They change in very rare cases, when there is a big change compared to the previous firmware version (for example, the transition from Android 2.x to 4.x). Even within Android 4.x versions, these values ​​usually do not change.

C00B907 – for most new devices, the value of C00 no longer changes, and in general it means binding to the region. Now the region can be determined in the “Special version” menu item – CUSTC10B907.

So, for smartphones, the Russia region (channel/ru) is CUSTC10. The binding to the region can easily be changed with a special firmware file; in some official firmware there is an update.app file in the cust folder weighing several megabytes or kilobytes, which changes the region to Russia.

B907 – the firmware version itself. I think there is no need to explain that the higher it is, the newer the firmware.

Using Registry Editor

The most complex, however, the most reliable of the methods presented. Generally suitable for more experienced users, and requires attention and concentration to avoid damaging computer data.

Registry Editor is a special computer debugging tool.

  1. To open it, type “regedit” in the search and click on the found tool.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Type “regedit” in the search and click on the found tool

  2. In order to get to the properties you need, you need to find them among a huge number of various characteristics, so be careful. Among the sections we find “HKEY_LOCAL_MACHINE”, in it we expand the SOFTWARE subsection, then “Microsoft”, in it – “Windows”, then “CurrentVersion”, here we look for “MMDevices”, select the first option “Audio”, and finally open the menu “Capture”

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Open the “Capture” menu

  3. In this section, you must search for the desired item manually, since in such a complex debugging environment, for the sake of stability, a regular search is not provided. Namely, in each item with an unreadable alphanumeric name, you need to check the “Properties” subsection for the presence of a file with the value (third column) “Microphone”. Next, click on the section itself in which the file was found.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Select the section with the line “Microphone”

  4. In the selected item, you need to select the “DeviceState” debugging parameter and open it by double-clicking.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Select the “DeviceState” parameter

  5. The system will display a small change window for the selected parameter. Here, in the line for entering values, enter “10000001” and confirm the changes by clicking “OK”. The setting will change to completely disable the built-in microphone. Now it is almost impossible to hack it and listen to you.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.


    Set the value and click “OK”

That’s it! You are aware of all the possible ways to mute the microphone with all the nuances.

Read useful information in the article – “How to check if the microphone is working on a computer.”

Power supply failure

The microphone may not function properly even if there is a power failure. In turn, failures can be caused both by incorrect software updates and by hardware faults. In the first case, you can try to solve the problem by uninstalling recently installed programs, as well as “rolling back” to an earlier update. When these methods do not bring the desired result, then you can look for reasons deeper, in the hardware.

Quite often there are cases when failures in the power circuit occur after the phone has been dropped. As a result of the impact, the solder paths on the motherboard may be damaged. In this case, the problem can be corrected by cleaning and straightening the tracks. Also, disturbances in the circuit can occur due to the use of non-original chargers that cause voltage drops.

All of the above malfunctions can be determined by a technician specializing in mobile phone repair. Moreover, it is not possible to carry out high-quality diagnostics of the phone for microphone malfunctions at home without using the necessary tools.

List of Huawei and Honor smartphones that will be updated to Android 10

Smartphone developers OnePlus and Google have announced that 2020 models will support Android 10. The new version of the OS contains the following new features:

  • increased charging savings;
  • the speed of the system has been increased;
  • dark theme for all sections of the phone;
  • gesture control function;
  • focusing to improve comfort when using utilities;
  • adding to the Black List utilities whose messages are not interesting;
  • increased level of confidentiality;
  • User consent will be required to determine location via Wi-Fi;
  • view any files in memory;
  • personal data settings are located in the “Privacy” section;
  • new magazine style design;
  • convenient arrangement of blocks in the settings;
  • the font for headings has been increased;
  • unique control curtain;
  • new section with notifications;
  • new version of the Camera application interface;
  • Morandi color palette;
  • new models for changing the interface;
  • visual animations when working with the main menu;
  • work with programs is smoother due to an increase in the number of animation frames.

According to the developers, only 10% of the models on the entire list will support Android 10. This fact is due to the need to release a unique shell for each series.

List of Huawei and honor devices that will receive the android and emui 11 update | smartphones | news digest | club dns

Huawei is actively developing and supporting its EMUI graphical interface. EMUI 10 was launched in 2020, bringing many qualitative changes to the company’s devices, but Android 11 is already looming on the horizon, and with it a new version of the shell from Huawei.

And although the rollout of EMUI 10 is expected to continue throughout 2020, today, thanks to huaweicentral.com
, it became known about the list of models that will receive Android 11 and will be updated to EMUI 11. Nothing is known about changes in the interface or functions, since the OS launch is planned only in the second half of 2020. Honor smartphones will also receive a shell update, which will now be called Magic UI 4.

At the moment, the list includes the same devices that received EMUI 10. It is expected that their technical characteristics will allow them to support the update without any problems. That is, users with flagship and mid-budget smartphones released no later than 2020 have absolutely nothing to fear. So, the following models will receive EMUI 11:

Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

It’s worth noting that the list is not the final version, as Android 11 is not yet out and there will likely be some changes.

Ways to adjust microphone sensitivity on your phone

If you decide to configure the microphone yourself, it is worth learning about the various methods. Currently, there are several options for formatting and managing software settings for various mobile devices. To configure the microphone, you can use the following options:

  1. Main menu. Usually on the main screen there is a gear icon, through which you can enter the menu responsible for the system’s operating parameters. Some models have a sensitivity increasing function.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

  2. Using the appropriate program in the phone’s operating system.
  3. Engineering menu. With its help, you can adjust the necessary values ​​for high-quality work. To enter this section, you need to know the encoding – it can be found on the Internet. After gaining access to the engineering menu, go to the Audio tab, select Normal Mode. Open the Type section to configure the microphone, click on the Mic icon and increase the sensitivity level from 0 to 6. After that, save the changes and reboot the system.

    Huawei Honor 6A firmware Android 11, Android 10, 9.0, 8.1(0),7.1.2.2 free download.

Increase volume

After successfully launching the engineering menu on your gadget, you can proceed to increasing the volume of the phone. Follow all instructions strictly in accordance with each step of the article.

Otherwise, playback quality may deteriorate.

Immediately after opening the menu, familiarize yourself with its interface.

The main window has several tabs, each of which is responsible for global settings (testing hardware components, working with the software shell, and so on).

To move between tabs, use the right-left swipe.

Follow the instructions:

1Go to the “Hardware Testing” tab;

2Click on the “Audio” item;

Fig. 8 – hardware components testing tab

3The window that opens will display a list of all modes that are available for configuration on your device – normal mode, headphones, earpiece and earpiece, alarm clock, notifications, etc. Click on the desired parameter (the meaning of each option is indicated in the next section of the article);

Fig.9 – list of available sound parameters

4In the window that opens, click on the Type field and select the desired field in the list that appears (Sip – for setting up cellular communications and Internet connections, Mic – for determining microphone sensitivity, Sph – for setting speaker settings, Sph2 – second speaker, Sid – sound reflection or echo, it is better not to change this field, Media – media volume mode, Ring – ringer and notification volume, FMR – radio operating mode);

Fig. 10 – selecting a parameter for the Type field

5In the next Level field, set the volume level (we recommend that you first click on the zero level and check the changed sound – this way you reach the most suitable playback level);

Fig. 11 – changing sound levels

6The next step is to adjust the value for the selected volume level. Enter it in the Valueis (default volume) field. The range of values ​​can be any number from 0 to 255. We recommend setting the average value;

7In the same way, enter the number in the MaxVol field. – maximum volume. To save the settings, press the “Set” keys;

Fig. 12 – setting standard and maximum values ​​

8 Enter Valueis and MaxVol for other volume levels. Remember, each level is one press of your volume up/down key. It is important that the transition of sound changes be as smooth as possible.

Fig. 13 – setting the value for each level

All other tabs of the engineering menu are configured in the same way and have the same parameters.

Via recovery (buttons)

Thanks to the Recovery mode, you can do a full reset to factory settings, even if you have forgotten the graphic password for your smartphone. Regardless of whether the gadget is protected by a PIN code, a hard reset destroys all data that has been saved.

Resetting data via Recovery is usually used in two cases:

  1. If the user has forgotten the password.
  2. If the device does not respond adequately to finger touches on the screen and simply glitches.

Regardless of the reasons for resetting the data, EMUI owners are protected from a long search for the desired menu item.

To turn on the phone in recovery mode you need:

  1. Press the volume up key and the screen lock (power) key.
  2. After the company logo appears, release the screen lock key.
  3. Wait for the menu to load completely.
  4. Using the volume and power buttons, select “ Wipe data/factory reset
  5. Use the lock button to confirm your selection.

On some Huawei devices, there is a sensor in the recovery menu, so you can select a menu item by clicking on it. After that, in the window that appears, use the keyboard to enter “YES” – confirmation of the user’s actions and press “Wipe data/factory reset” several times.

Via twrp

TWRP is a custom recovery installed by default on some smartphones. It is with its help that Android will be rolled back to the previous version. Since this Recovery is found only in a small number of devices, you need to download it yourself. The easiest way without root rights is to use ADB and Fastboot.

https://www.youtube.com/watch?v=f-yEO1sHAjI

[su_note note_color=»#abdb6c» text_color=»#000000″]Note that this method will require a computer and an unlocked bootloader on the phone.[/su_note]

So, first of all, to install TWRP, we start a computer or laptop running the Windows operating system. Now we load the Minimal ADB and Fastboot package onto it, containing the ADB and Fastboot utilities necessary for operation. Run the downloaded file and follow the installer’s simple instructions.

After installation, go to the selected directory and check for the presence of two applications: ADB and Fastboot.

We return to the phone and enable the “USB Debugging” mode on it. How to do this is described in detail in the previous method. After that, connect the device to the computer using a USB cable.

On the PC, launch the command line as administrator (Start menu – “cmd.exe”). Enter the command cd Path_to_folder_with_ADB into it. For example, the folder with programs is located at the root of drive C, then enter the request cd C:Minimal ADB and Fastboot and press “Enter”. Next, we check the visibility of the smartphone utility by entering the adb devices command.

At the next stage, download the TWRP Recovery image file specifically for your phone to your computer. To do this, go to the official website of the developer, look for the desired device model and complete the download.

[su_note note_color=»#abdb6c» text_color=»#000000″]By the way, if your device is not on the list, you can search for TWRP Recovery on third-party forums.[/su_note]

Transfer the downloaded file to the folder where the ADB and Fastboot applications are located. For clarity, we recommend changing its name to “twrp.img”.

Open the command line and enter the request adb reboot bootloader. After pressing the “Enter” key, the phone should go into Fastboot mode, which will be indicated by the corresponding picture on the screen.

Now you can go directly to installing custom recovery. At the command line, enter the command fastboot flash recovery twrp.img, where twrp.img is the image file with TWRP, which was renamed earlier. Upon successful completion of the procedure, a corresponding message will appear on the PC screen.

Next, reboot the phone in normal mode by entering the fastboot reboot command. After this, you can proceed to flashing the device. First of all, we download the archive with the firmware to the computer, which does not need to be unpacked. Then we transfer the necessary files to the memory card and insert it into the phone. It is important to select a folder that contains a simple and understandable name in English.

[su_note note_color=»#abdb6c» text_color=»#000000″] Note that to transfer files to a memory card it is better to use a card reader. [/su_note]

Now go to the “Recovery” menu by simultaneously pressing one of the pairs of the following buttons:

  • Volume down Power;
  • Volume up Power;
  • Home button one of the volume keys power button;

Next, in the “Recovery” menu, perform the following actions:

  1. Click on the “Wipe” item.
  2. Move the “Swipe to Factory Reset” slider to the right. This action starts cleaning the file system
    phone.
  3. After completing the procedure, click on the “Back” button.
  4. Click on the “Install” button.
  5. Select the storage where the files needed for flashing are located and click “Ok”.
  6. Find the desired archive with the firmware, and then check the “Zip file signature verification” box.
  7. We start the firmware installation process by moving the “Swipe to Confirm Flash” slider to the right.

When the installation is successfully completed, a corresponding message will appear on the screen. All that remains is to reboot the device by clicking the “Reboot System” button.

Rate article
Huawei Devices
Add a comment