How to recover deleted audio or music files from Huawei phone

Hisuite is not installed: reasons and what to do

There are three main obstacles that prohibit or complicate the installation of the utility:

• lack of memory on external and internal storage;
• system error;
• incorrect loading.

If there is not enough space on the smartphone to download drivers, then this significantly affects the installation. Then the file either does not download at all, or is downloaded but not installed or opened. Too little RAM also affects this. When unzipping is in progress, the device needs more power and operational reserves than when downloading an archive.

An unknown error also prevents installation. Then you need to restart your PC or laptop. A restart updates all affected components.

A crash appears when updating via wifi: what to do

First, let’s look at the situation when, when updating over a wireless network, the message software install failed appears, what to do. If you made any changes previously, roll back the data. In addition, please do the following steps for Huawei:

1. Connect to the Internet and make sure the connection is stable. Breaks during the recovery process are highly discouraged. To be on the safe side, restart the router by pressing the dedicated reset button or unplugging the power plug from the household outlet.
2. Log out of your Google account to protect yourself from FRP blocking.
3. Create and send a backup copy of your data to Google Cloud. This must be done if the information is needed in the future.
4. Restore the device to factory settings.
5. Try running the update again via Wi-Fi on Honor or Huawei.

If software install failed still appears on Huawei, the best solution is to repeat the steps above and download new information via PC. For these purposes, install and use the HiSuite program. The software is easy to install and configure, so even a beginner will quickly figure out what needs to be done and how.

Why hissuite does not see the device: reasons

To understand why the problem occurred, first make sure that the HiSuite connection is set up correctly. Below are the instructions.

• First you need to connect your phone using the USB port to your PC.
• Swipe down from top to bottom to open the phone’s curtain.
• Select the desired service there.
• The driver loader will launch on your computer.
• Open the program and folder of the connected device on your PC or laptop.
• The application will begin downloading for the connection.
• Driver loading begins.

What is this error and why does it occur: consider the reasons

Literally, Huawei software install failed can be translated from English as “Error installing the program (software). As a rule, such a message appears during the process of updating smartphones from Honor or Huawei. Additionally, the phrase Press powerkey to confirm is added to the display. The address where you can go to get the necessary help is also indicated here.

There is often information on the Internet that the update is not installed if the user has made changes to the smartphone system. If you still cannot do without the firmware, remove all previously made changes that lead to the appearance of the software install failed message on Huawei.

Below we will dwell on the question of what to do with the inscription software install failed on Huawei. For now, let’s highlight the main causes of failures:

• Installing another recovery from a third-party manufacturer. TWRP, which is often used on smartphones, is in demand among users.
• Hacking a phone (opening root). When doing such actions, you need to be prepared for the software install failed error to appear on Honor. After such actions, the smartphone essentially turns into a device without a warranty. In the event of a breakdown, you will have to repair the device at your own expense.
• Unlocking the bootloader.
• Violation of the integrity of the firmware archive, errors during the installation process, damaged SD card.
• “Forcible” activation of NFC on Honor 8, 9, 9 Lite and 10 devices.

Regardless of the reason, it is necessary to fix the software install failed error on Huawei. In this case, the instructions depend on the selected update method — via Wi-Fi or manual method.

: the latest version of magic ui 3.1 firmware has become available for eight honor smartphones

“please connect usb cable to your computer and open hisuite”

If suddenly the phrase “Please connect USB cable to your computer and open HiSuite” appears on the display, then you should make sure that the cable is suitable for work. Immediately check to see if the cord is disconnected from the socket. If it holds well, then the problem is in the integrity of the wire. In this case, you will need to replace the cable with another one.

Problems with the nest also occur. To do this, insert the wire into another laptop or PC, connect the other end to the phone. If there is contact, then the socket needs to be repaired. If the connection is not found, then there is a problem with the cord.

Clockworkmod recovery

You can download the ClockworkMod Recovery program directly from the operating system using the ROM Manager application downloaded from Google Play. To install, select Flash ClockworkMod Recovery, to enter — Reboot into Recovery. As with Titanium Backup, the user needs root rights to work with this utility.

After entering the program, a menu appears with possible actions:

• Reboot system now — reboot the device.
• Install zip from sdcard — install a zip archive from a memory card.
• Wipe data/factory reset — return to factory settings.
• Wipe cache partition — clearing the cache.
• Backup and restore — creating backup copies and restoring them.
• Mounts and storage — connecting certain sections of memory and formatting them.
• Advanced — advanced features, such as rebooting CWM, clearing dalvik cache, partitioning device memory, restoring system application rights to default and others.

The capabilities of ClockworkMod Recovery are much wider than those of the Titanium Backup application. This utility is perfect for confident users of Android devices, but beginners should be careful not to damage the gadget’s operating system.

Easy backup & restore

Also a very good option. The capabilities of this utility are even wider than the previous one, since you can copy everything from applications to contacts, bookmarks, calendar events and language layouts on the keyboard. Moreover, the “backup” can be either saved on a smartphone or sent to the “cloud” or to a PC. In general, everything is provided.

Huawei

The list of Huawei smartphones that will receive EMUI 10 includes the following models:

• P30 Pro;
• P30;
• Mate 20 Pro;
• Mate 20;
• Mate 20 X;
• Nova 5T;
• Mate 20 RS Porsche Design;
• Mate 20 X 5G;
• P30 Light;
• Nova 4e;
• P20;
• P20 Pro;
• Mate 10;
• Mate 10 Pro;
• 10 Porsche Design;
• RS Porsche Design;
• 20 Light;
• P Smart 2020;
• P Smart 2020;
• P Smart Pro;
• P Smart Z.

Titanium backup

First, let’s figure out why you need to use special software at all, because Android natively has backup capabilities. For example, when you change your phone or after a full reset to factory settings, just log into your Google account and your contact data will be restored.

However, do not forget that in this case all applications and games, Wi-Fi and other network settings, system settings, etc. are lost. And this is a very significant problem if dozens of those same applications are installed — since restoration can take an inadmissibly long time.

https://www.youtube.com/watch?v=Ig0PLWvbdqk

So, to create a backup, we need Root rights on the device and the Titanium Backup program itself. Root rights are needed to gain access to system files and folders in which the settings and data of interest to us are stored. Next, install the Titanium Backup program.

Don’t forget to allow installation of applications from “Unknown sources”. After the first launch, Titanium Backup will ask for superuser rights, we give them and we can remember the decision. Don’t rush to click everything — the program is quite powerful, and with full access to the system, an inexperienced user can do a lot of things. Adhere to the principle: “never use functions unless you are sure what they do.”

To create a backup, you will need a memory card installed in the appropriate slot with sufficient free space, since the backup will be made to it. On the main working screen of Titanium Backup, select the “Backups” tab.

Press the “Menu” button on the phone and select “Processing” at the bottom of the screen. In the menu that opens, select the item “Back up all user software and system data”, click “Start” opposite it. The program will prompt you to select all applications for backup.

We are interested in a complete copy of the system, so we don’t change anything. After this, I start the process of creating a backup. The process may take varying amounts of time depending on the number of programs installed. Now in the “TitaniumBackup” folder on your memory card you can see a large number of backup files, it is advisable to copy them to a computer or other device — you never know, the microSD card might fail. It is also possible to configure automatic creation of backups in the “Schedules” menu.

When the time comes and you need to restore the contents of your Android device, you can do this in several ways. Firstly, you can restore both applications and settings. Through the “Processing” menu item, go to the “Recovery” section and click “Restore all software with data”.

You can also restore only individual applications — then in the “Backups” section, select specific applications and click “Restore”. Don’t forget that sometimes you need to restart your device before the changes take effect. In any case, Titanium Backup offers a huge number of options for creating and restoring backups, so you can always return your Android gadget to its original state.

Backup

The most effective way to restore installed applications, system programs, settings and firmware is to roll back from a previously made Backup. Before making any changes to the software of your Android smartphone or tablet, you should always make backup copies.

This will completely protect you from unpleasant consequences. In general, creating backups is the golden rule not only when flashing Android devices, but also in any serious programming. If for some reason you did not follow the recommendations and began to change the firmware or make changes to the operating system without creating a backup copy before these procedures, then there is a way out.

There are many applications that are designed to create backup copies of your Android gadget, all of them have their own advantages and disadvantages. But we will look at the example of one of the first and most universal programs for backup and recovery — Titanium Backup.

Possible problems after updating Android

Not to say that an Android upgrade will completely ruin the life of the device owner, but it is guaranteed to cause moments of headache.

After updating, some shortcuts periodically disappear from the desktop, and along with them, programs.

In other cases, after modifying the system, the user discovers new, completely unnecessary programs that cannot be removed.

Second option – advanced

If the system does not allow flashing (which happens in most cases), you can take an alternative route. It requires a PC and a previously installed ADB Run utility. The sequence is as follows.

On your mobile device, activate USB debugging mode and pair with your computer.

• Disable the gadget, and on the PC enter the “Recovery” menu.
• Go to the “Apply update from ADB” section.
• Transfer the file with the firmware to the folder with the utility.
• Launch it on your PC, enter “7” and press “Enter”.
• Enter “1” in the input line.
• Next, enter the command “adb sideload archive_name_with_firmware.zip” and confirm with the “Enter” button.

The flashing process is now activated, the completion of which the system will notify you with a message.

Hard reset

Go to the “Android system recovery” menu. First you will need to turn off your smartphone or tablet, and then use the key combination, which again differs depending on the device manufacturer:

• a more or less universal option — simultaneously hold down the power and volume down buttons;
• Samsung – simultaneously hold down the power and volume up buttons;
• Sony Ericsson – simultaneously hold down the power, volume down and camera buttons;
• Huawei — simultaneously hold down the power, volume down and volume up buttons;
• LG – simultaneously hold down the power, volume down and home screen buttons for more than 10 seconds. Release the power button after the LG logo lights up on the screen, hold the rest until you go to the recovery screen;
• HTC (the most interesting) — hold down the volume down key, then briefly press the power button. Once you see the recovery menu on the screen, you can temporarily leave the volume down button alone. Find the “Clear storage” item, select it by pressing the power button and confirm the action by clicking on volume down.

For more confident navigation through the “Android system recovery” menu, it would be useful to remind you what the buttons do: highlight is to navigate through the menu, and select is to select a menu item.

We get to the line “wipe data / factory reset” and select this item. Then in the new menu we find the action confirmation sub-item and select it.

With both the hard and the lighter reset options, a reboot will occur, after which your device will wake up with standard factory settings.

How to get rid of “software install failed” when updating manually

When manually installing firmware on Honor or Huawei, errors are not uncommon, so you should pay attention to the correct method of updating:

1. Download normal firmware from official or verified resources. A popular source is 4PDA.
   
2. Unpack the “dload” folder from the archive; if there is none, then create a folder on the desktop with this name and unpack the UPDATE file there. APP of their archive with firmware.
3. We connect the smartphone via USB to the computer, transfer the “dload” directory to the SD card.
4. Turn off the device and disconnect it from the PC.
5. To update the firmware on a switched off smartphone, you need to hold down the Volume Up Volume Down Power keys. Hold until it vibrates and starts the update.

It is possible that the update still does not work, then you need to dig deeper into the essence of the problem. First you need to check the performance of the memory card. It must be formatted in FAT32 format. Size matters — make sure the SD card is at least 4GB, preferably 8GB.

1. If it is possible to change the memory card, do so, and then repeat all the steps with updates.
2. Check the integrity of the downloaded archive. It should open normally and no errors should appear.
3. Charge your device to at least 50%.
4. The last method you can try is to install custom firmware.

How to roll back an Android update on Huawei and Honor

Let’s say right away that it is possible to return the old version. But this is done not by rollback, but by replacement. That is, you remove the current shell and install the old version. This action is performed in three ways:

• via USB debugging with a computer;
• Recovery menu;
• Bootloader utility.

Working with shells and system menus is an important process. If you do something wrong, you risk losing your settings or even your smartphone. Therefore, if you perform similar actions for the first time, strictly rely on the steps of the step-by-step instructions.

How to roll back an Android update on Huawei and Honor?

Updating the operating system completely removes the previously used OS, replacing outdated programs with fresh ones. As a result, the only way to roll back will be to remove the software that the user does not like and install new firmware on the phone. Other solutions will not bring the desired effect, because:

• the updated version will not disappear;
• or the installed program will not work.

How to downgrade from harmony os to emui 11 on Huawei smartphones. official instructions

How to get root rights

To get ROOT access to your smartphone or tablet, it is recommended to use one of the applications for Windows. The most popular are:

• Kingo Android Root;
• Unlock Root Pro;
• SuperOneClick.

Programs such as z4root and Universal And Root are considered no less useful.

The smartphone must be synchronized with the PC onto which the selected utility must be downloaded. All user actions are reduced to pressing the “Start” button. The rest of the actions will be performed by the program itself; you will only need to periodically confirm them by clicking. Each application is supported by certain phone models, so to perform flashing correctly, you need to find yours in the list.

How to flash Android through recovery

ClockworkMod Recovery is a “must have” application. It is a much more advanced alternative to the standard utility (recovery), which is included in the operating system by default. If the latter can only clear the cache and perform updates, then ClockworkMod Recovery allows the following:

• edit system components via Android SDK;
• create a full system snapshot and use it as a backup;
• install third-party firmware;
• update individual system utilities;
• create and edit partitions in the file system.

How to remove an application update on Android?

To remove application updates, you will need:

1. open the “applications” section on Huawei;
2. find a suitable one in the list of installed programs;
3. click on it to open the menu of available actions;
4. select uninstall updates from the list that appears;
5. confirm the decision.

How to remove the latest OS update for Honor and Huawei using utilities?

If the above methods do not help, you can still use third-party applications to roll back the OS. Before using them, it is recommended to study the reviews so as not to encounter malware that will not delete Android, but will only steal the user’s confidential data.

Which versions of android can be rolled back?

In Android 9.0 Pie, Google has finally banned rolling back the OS version to a previous state, explaining the unpopular move:

• the desire to protect users and improve the security of smartphones;
• simplifying and speeding up the update process thanks to Project Treble technology;
• combating fragmentation that prevented legacy versions from working.

That is, owners of old Android devices that have not been updated to the Pie version will be able to roll back using the built-in functionality.

What is the probability of license revocation?

It is unrealistic to predict the outcome of the situation. It can be assumed that the US will act cautiously against Huawei. American business is no less dependent on China than Chinese business is on the United States. Apple and Tesla, which have factories in China, will definitely suffer due to retaliatory sanctions.

When is it possible to do this

To save money, many manufacturers of technological devices, such as laptops, optimize them only for specific versions of operating systems. And if the device initially ran Windows 10, then installing Windows 7 on it in most cases will be almost impossible.

The whole reason often lies in the components, namely the installed processors. Manufacturers do not consider it necessary to incur additional costs by optimizing their hardware for all existing versions of Android. Therefore, it turns out that the modern Snapdragon 845 simply will not run on Android 5.0.

However, we are talking about a rollback, which means that a previous version of the operating system was once installed on the smartphone. Yes, this is true, but the file with the old firmware after the next update is simply deleted without the possibility of recovery.

Insufficient memory on the device

The lack of sufficient megabytes on the disk drive is a serious problem for a new application, especially one that is quite powerful and voluminous. Even if it seems that a 200 MB program should fit into the free 1 GB, the harmful system stubbornly refuses to accept the oversized newcomer. In this case, you can:

1. Delete everything unnecessary and clear the cache.
2. Transfer everything possible from internal memory to external sources, possibly to a smartphone memory card, to the “cloud”, or even transfer files to another device.

The process itself

So, you are all ready to start the process. Let us remind you that this process is individual for each device, so we will focus on manipulations that are the same in most cases. We present you the procedure:

1. Do Backup (see above);
2. Put the device into programming mode (may be called differently; see instructions);
3. Connect the device to the computer;
4. Launch the Root program;
5. Launch the downloaded program and select its version;
6. We start the installation process, wait;
7. When finished, it is advisable to reset the settings to factory settings;
8. Reinstall the program you used to make the Backup, insert a memory card with a backup copy, and start the data recovery process.

Over the air update

Over-the-air update is the installation of a new version using FOTA. This is done using the following algorithm:

• go to settings;
• select the “About phone” section;
• tap on the line “System update”;
• option — “Online”.

Then everything will be done automatically. Do not turn off the machine until the reinstallation process is complete. It is recommended to use a Wi-Fi hotspot as it takes up a lot of data. If during reinstallation the mobile Internet ends, the device will freeze. In addition, mobile modules are turned off and turned on again at the time of reboot.

Tablet firmware update

All Huawei and Honor equipment works on the same principle, respectively, they have the same operating system and very similar features. That is why the developers offer you the same reinstallation options as for mobile phones:

• by air;
• local;
• forced;
• using HiSuite;
• manually by downloading the file.

Rollback via hisuite

Resetting the software via Hisuite will require:

1. installing the mentioned utility on the computer and then connecting the smartphone (with acquired developer rights and the “USB debugging” mode enabled) to the PC;
2. subsequent installation of additional programs for interaction between devices (installed automatically after connection);
3. after that you will have to press “EMUI Rom”, “Download Rom” in sequence;
4. After starting the download process, you need to follow the instructions of the utility.

Disable automatic updates

As a preventative measure, experts recommend disabling the automatic updates function of your mobile device. This will help avoid installing “raw” firmware, which can lead to various problems described above.

1. Go to the settings menu in the “System” section, “About phone” item.
2. Open Update Center.
3. Select «Software Update».
4. Uncheck the box next to “Check and download updates automatically.”

Now you can independently manage the device update process: wait for the final firmware version or refuse to install updates altogether if you feel most comfortable with the current version and do not want to change anything.

The application is not supported by the system version

It is necessary to pay attention to which version of the operating system the developer implemented support for the application. Let’s say, if the program is designed for the Android 7 OS, then the previous variations (4, 5, 6) as well as the subsequent ones (8, 9) will not support the new product. In such a situation, you can go in several ways:

• Update operating system version
• Try downloading from different sources, not just Google Play, since installation requirements are often too high.
• Contact support and ask to include additional versions in the list of supported ones.

Problem with google play or software services

Errors occur not only on the mobile device, but also with service sites or with the application store. If the reason is in Google services, you must:

1. Open the “System Settings” menu section and select “Applications”.
2. In the menu that opens, look for “Google Programs and Services.”
3. Clear cache.
4. Trying to install the application again. If the steps do not help, you will have to reinstall and update all servers again.

Problems after updating the Android OS

In fact, problems may arise, but there is nothing terrible about them. It’s rare that a couple of shortcuts disappear from the desktop, or the programs to which they belong. These programs are accompanied by a number of updates or there are replacements for them in the Play Store.

Along with the OS update, new programs will be installed. They can be useful, but they can also be uninteresting. The problem is that they cannot be deleted if necessary by the user. But the biggest problem is that if the installation was not carried out through settings and updates, then the OS is unofficial and the warranty for servicing the gadget expires.

Is it possible to live without Google services?

Unlikely. The deGoogle movement is gaining popularity on Reddit, with members boycotting all of the company’s apps. Some of them have already given up, admitting that Google services have penetrated too deeply into our lives and it is almost impossible to live without them.

It turns out that in order to fully use Google applications, you will need to download major updates manually. This method is not suitable for all users; most need a smartphone to turn it on and use it right away.

Guide to recover deleted or lost audio files from Huawei phone without backup

Step 1: Launch Android Toolkit on your computer Launch the Android Data Recovery program after downloading and installing it on your computer.

To recover deleted audio files from Huawei phone, select «Android Data Recovery».

Step 2: Connect your Huawei phone to your computer and enable USB debugging Use a USB cable to connect your Huawei phone to your computer. Then the program will automatically detect your Huawei phone. If the device cannot be detected, enable to enable USB debugging. Follow the instructions below:

1. For Android 2.3 and earlier: Tap Settings > Applications > Development > USB Debugging.2. For Android 3.0 — 4.1: Go to Settings > Developer Options > check the USB Debugging box.3. For Android 4.

2 and later: Go to Settings, Build Number tab 7 times. Go back to Settings and select Developer Options > check the USB Debugging box. More details are included in this guide: How to Enable USB Debugging on an Android Device.

After enabling USB debugging mode, continue to follow the next step.

Step 3. Select the audio file type to scan When you see the interface shown below, check «Audio» and click «Next» to allow the program to scan your device. You can also «Select All» to scan and recover all data from Huawei phone. To save time when scanning, we recommend simply selecting “Audio”.

Step 4: Allow the device to scan When the following windows appear, you can switch to your Huawei phone again, click «Allow» on the device and make sure the prompt is remembered forever, then go back to the computer and click the «Start» button to continue .

Step 5: Put your Huawei phone into deep scan mode. When the below interface appears, Huawei deep scan requires root permission. To do this, click Advanced Root and download the Android Root tool (KingoRoot) on your computer, then install, launch and use it to quickly root your Huawei phone.

Related article on how to root and root an Android device using KingoRoot.

Once rooting is completed, the phone will begin a deep scan of your device. The process will take a few minutes (15 to 20 minutes). Please keep the connection between your Huawei phone and computer during the scanning process.

Step 6. Preview and recover audio files from Huawei phone After scanning, all audio files will be listed on the interface. If you want to check only the deleted data, you can enable the «Show deleted items only» button at the top of the window.

Step 7. Import Recovered Music to AndroidAbove the simple steps, you have recovered your deleted or lost audio files and saved them on your computer. If you want to transfer received music files to Huawei phone or other Android devices for listening, you can use this Android Transfer tool, it can help you import music, videos, photos, contacts to Android devices quickly. Related Tutorial: How to Transfer Music, Videos, Photos to Android

It’s not just audio, this Android Data Recovery software can also help you recover your photos, videos, call logs, contacts, WhatsApp data and more from Android devices. You can try and restore them in similar steps.

HUAWEI Data Recovery Supported Models:

Huawei Mate: Huawei Mate 20 / Mate 20 Pro, Huawei Mate 20 X (5G), HUAWEI Mate 20 RS Porsche Design, HUAWEI Mate RS Porsche Design, Huawei Mate 10 / 10 Pro, Huawei Mate Xotex , MUM XIUME PATE, Huawei Mate X, MUME PATE Mate 10, Huawei Mate 10 Pro, Huawei Mate 9 Porsche Design, Huawei Mate 9, Huawei Mate 9, Huawei Mate S and Huawei Mate RS Porsche Design.

Huawei P: Huawei P30 / P30 Pro, Huawei P20, Huawei P20 Pro, Huawei P10, Huawei P10 Plus, Huawei P9, Huawei P9 Plus, Huawei P8, Huawei P8 P8, P2020, P2020, PXNUMX, PXNUMX, PXNUMX HUAWEI P smart

Huawei Honor: Huawei Honor V9 ， Huawei Honor 8 ， Honor 8 Pro, Huawei Magic ， Huawei Honor 7 / 6, Huawei Honor 6, Honor 6X, Huawei Honor 5X Hua Huawei Honor 4 XNUX XORX 3 XNUX XORX 4 XNUX XOR XNUMX XNUMX XNOR XNUMX XOR XUMX

Huawei Nova： HUAWEI nova 5 Pro, HUAWEI nova 5, HUAWEI nova 5i Pro, HUAWEI nova 4 / nova 4e, nova 3 / nova 3i, nova 2s, Huai-Nova, Hua-Nova, Hua -Nova, Hua-Nova, Hua-Nova

https://www.youtube.com/watch?v=hb15ZlixZC8

Huwei G: Huawei G9, Huawei G9 Plus, Huawei G9 Lite, Huawei G8, Huawei G7 Plus, Huawei GR5 2020, Huawei GT3, Huawei GR5, Huawei GR3, Huawei G7, Huawei

Huawei Y: HUAWEI Y9 Prime 2020, HUAWEI Y7 2020, HUAWEI Y9 2020, HUAWEI Y6 2020, HUAWEI Y5 2020, HUAWEI Y6 Prime 2020, HUAWEI Y6 2020, HUAWEI Y9 2020, HUAWEI Y 5 Prime 2020, Huawei Y5 2020, Huawei Y6II, Huawei Y5II, Huawei Y3II, Huawei Y6 PRO

Ascend: Huawei Ascend P8, Huawei Ascend G7, Huawei Ascend Mate 7, Huawei Ascend Mate 6

hisuite backup failed, stopped by phone manager

HiSuite does not recognize Huawei and Honor phones, and displays a backup error due to violation of authorization rules or lack of Internet. If you entered the password incorrectly:

• select storage media;
• activate backup;
• In the dialog box that appears, enter the correct password.

To prevent this from happening in the future, copy the file called info.xml to the folder with the synchronized data. Duplicate the restoration later.

Reset to menu

The path to the treasured option depends on the type and model of your device:

• Android phones version 2.3: Settings > Privacy > Factory reset;
• Android phones version 4: Settings > Device storage > Factory reset;
• tablets on Android version 4: Settings > Backup and reset > Reset settings.

System failure

It happens that the system just freezes and slows down, everything is simple here:

1. Reboot the phone.
2. Using special programs, we check the system for viruses.
3. You may need to perform a hard reset and reconfigure the system.

In order to still install the desired application on your favorite smartphone, it is better to take care of a step-by-step solution to all the proposed problem options. As a rule, a set of problems is very rare, so once you deal with one or two breakdowns, everything will work out. Share link:

Downloading and preparing for installation of factory firmware

It was previously mentioned that Google does not allow you to return your phone settings to their original state, so you won’t be able to find the required firmware file on official websites. Users will have to look for a preliminary version of Android on third-party services and forums, such as w3bsit3-dns.com. However, before installation, it is recommended to make sure that the resulting file is not infected with viruses.

Smartphone stuck during update

Freezing is a sign that the equipment does not “carry” the load that you ask of it. Wait 20-30 minutes, and if the device gets very hot, abort the installation process. If the situation is resolved, be sure to write about this situation to the support service so that the administrators take this feature into account.

Installing android

It is important to emphasize that changing the settings and installing Android yourself will make it impossible to return the phone under warranty. Most service centers consider such intervention unacceptable, therefore, if careless attempts to roll back the OS lead to a malfunction, the repair will be paid regardless of the warranty period.

The installation is interfered with by a previously downloaded program

It happens that you can’t install a new application because of an existing program. Installation fails even from different sources, then you can use the following tips:

1. Delete previously downloaded application
   .
2. Check all archive folders and delete all residual data and files of the old program.
3. Perform a clean install

Part 1. recovering deleted audio on Huawei phone from backup

If you backed up your device to protect data using Huawei Backup APP when you accidentally deleted files on your Huawei phone, you can easily restore the backup and get the deleted audio back on your Huawei phone. Here you can learn how to recover lost audio files on Huawei phone from Backup app.

Step 1. Open the Backup Application on your Huawei phone and tap restore.

Step 2: Select the data source to restore and click Next.

Step 3. Select Audio File Type to Recover.

Step 3: Click Start Recovery. In the dialog box that appears, select a location to restore your backup data from videos, photos, audio, and other locations. Step 4. Click OK to start restoring select Audio back to Huawei phone.

Part 2. recover deleted audio or music files using huawei data recovery software

If you can’t find the backup you made earlier to restore Huawei, or you didn’t have a backup of your data before deleting the file. Don’t worry, you still have the ability to scan and recover deleted files from your Android device without backup.

Android Data Recovery is a professional data recovery tool for Huawei phones and tablets. It not only supports recovering deleted audio and music files from Huawei phone, but also allows you to recover photos, videos, WhatsApp messages, documents, text messages and contacts from Huawei phone (Mate, P, Nova, Y, Honor, G, Ascend sries …)

This powerful Android data recovery tool will help you recover data from Samsung Galaxy, HTC, LG, Sony, Google Nexus, Google Pixel, Xiaomi, Motorola, Huawei, Sony, Sharp, OnePlus and other brands running Android OS. Now you can download the software and try to use it to recover deleted data from Huawei phone and tablets. The following guide will be very helpful.

Features:

• Recover deleted/lost music files on Android smartphone/tablet.
• Recover Android data by scanning your Android phone and tablet directly.
• Preview and selectively restore what you want from your Android phone or tablet.
• Supports various file types including WhatsApp, messages and contacts, photos and videos, audio and documents.
• Extract data from dead/broken Samsung phone.
• Fix normal Android system such as freezing, crashing, black screen, virus attack, screen lock.
• Supports 6000 Android device models and various Android OS.

Via bootloader

Bootloader is a bootloader that allows you to install firmware on your phone. In basic mode, it is blocked by developers to prevent inexperienced users from changing system parameters. Without unlocking it, you won’t be able to install the required version of Android on Huawei.

Via recovery

Some users are confident that the Recovery menu will allow them to install the required firmware. In fact, the system menu will not allow you to perform this procedure. The required function is simply not there. If you reset the settings to factory defaults by selecting “Wipe data/factory reset”, you will get a clean Android of the latest version.

Through custom recovery

Another convenient option for rolling back Android is a custom TWRP flashing. Firstly, it is already installed on some smartphone models, and secondly, you can download it yourself. To do this, you do not need to obtain ROOT rights, but you only need ADB and Fastboot utilities, a PC and an unlocked bootloader on your phone.

Instructions:

1. Download the “Minimal ADB and Fastboot” package to your computer and install it, placing it in the selected directory.
2. On your smartphone, activate the “USB Debugging” option and connect it to the PC.
3. After checking compatibility, you need to download the TWRP Recovery image file to your computer, which is suitable specifically for this smartphone.
4. Next, go to the official website of the developer, find the model of the gadget you are flashing and complete the download.
5. Place the file (it’s better to call it twrp.img) in the folder with the ADB application.

Now everything is ready to install custom recovery. On the command line specify:

• first request “adb reboot bootloader” and activate execution with the “Enter” button;
• then “fastboot flash recovery twrp.img”.

After the process is completed, you will need to restart your smartphone and do the following.

• Download the archive with the firmware onto your PC, the files of which are immediately transferred to the memory card.
• Enter the “Recovery” menu by selecting one of the key combinations: “Volume (up or down) plus Power” or “Home” volume control power on.”
• Here you will first need to clear the file system, and then go to the archive and start the firmware installation process.

To complete, you will need to reboot the device again.

Via PC

First of all, install the HiSuite program from Huawei on your computer. Then:

1. Launch the settings on the smartphone.
2. Go to the “About phone” section and click on the “Build number” line several times in a row.
3. Do this until the system shows a notification that developer rights have been granted.
4. Go back and open the “For Developers” tab.
5. Check the box next to “USB Debugging”.
6. Connect the phone to the PC via cable.
7. Launch the HiSuite program and open the updates tab.
8. In the drop-down list, select the version you are interested in and click “Install”.

It is important that at the time of the procedure the phone is charged at least 50% and the USB cable is in good condition. If the operation is interrupted due to a faulty cable or a dead battery, the gadget risks turning into a “brick.”

Do they use these stores?

Yes. Even as an alternative to the official Android app store, they have a large audience. Such stores are beneficial for both developers and users. For the former, this is a chance to promote their application in a less competitive environment, for the latter, it is more discounts on paid content; stores thus attract an audience.

Is it safe?

It all depends on the store you choose. Those listed indicate that applications are scanned for viruses before being posted. They can be trusted because they have a large audience, but this is not the case in all stores. When choosing an application store, it is better to look at the most popular ones if you do not want to infect your smartphone.

Results

If you know what software install failed on Huawei or Honor means, you can quickly navigate the situation and solve the problem. If you follow these instructions, you can update the system. If difficulties arise, the cause may be a damaged archive or errors when creating the dload. We discussed what to do in such a situation in the article.

Conclusion

In conclusion, I would like to examine one more concept that you will definitely come across while studying the forums. This is the concept of «brick». A “brick” is a device that, after returning from Lollipop to Kitkat, stopped working altogether. To prevent this from happening to your Android device, you need to approach the matter as carefully as possible and carefully study all aspects. Only after the whole picture of the planned actions is clear and understandable can you be sure of a successful result.

In the first case, there is nothing much to worry about, since, most likely, the cause of the trouble was a conflict in some applications or widgets and everything can be corrected by returning to the factory settings. If the smartphone still works, albeit with various “artifacts,” you can also fix this yourself.

In the third case, it is unlikely that you will be able to get by with “little loss” and you will have to either restore your smartphone through a computer using special software, or contact a service center or a familiar computer guru who knows how to restore Android after unsuccessful firmware.