How to update Android on Huawei Honor 8A

In order to install any original firmware, you must do the following:

1. Copy the dload folder with all its contents to the root of the SD card;
2. Turn off the tablet;
3. Insert the SD card if it was removed;
4. While holding the Volume Up key, press and hold the Power button until the screen blinks. The Volume Up button must be held until the installation process begins (a green robot and a progress bar will appear);
5. Finally, when prompted, remove the SD card or hold the Power button for 10 seconds.

Note: In some cases, you don’t need to press the buttons at all and the process will start automatically after turning on/rebooting.

If the update process does not start, you need to open the calculator, enter ()()2846579()()= and then select Project Menu Act -> Upgrade ->SD Card upgrade.

Attention!

• Do not remove the card or press the power button until the process is complete and the appropriate prompt appears on the screen;
• If the power is lost during the installation process, repeat the firmware process;
• After copying the firmware to the SD card, check if it is damaged (copy the firmware files, disconnect and then connect the SD card, check that the *.zip files in the firmware open without errors on the computer).
• Delete the firmware file from the SD card or rename the dload folder if you don’t want to accidentally update your tablet again!

What you need to know before updating your smartphone firmware:

• Only FAT32 format cards can be used. Preferably less than 4 GB;
• The firmware must be located on the SD card in the dload folder;
• You cannot use the device’s built-in memory (except for those devices that do not have a Micro-SD slot);
• The file with the firmware should be called UPDATE. APP;
• During the firmware installation, the device will reboot several times — this is normal;
• If there are several folders in the archive with the firmware (step1, step 2, etc.), then flash all the files one by one.
• During a local firmware update, all data on the internal memory of your smartphone will be deleted!

Attention! Everything you do with your device is at your own peril and risk! No one guarantees the correct operation of the device during and after installing third-party firmware and/or other actions not provided by the manufacturer!

What to do after installing updates

Once the process of flashing the device is successfully completed, you need to turn on the smartphone and check how stable it is. If everything is in order, you can restore the backup file.

In the case where the backup was uploaded via Google Drive, it is enough to log in on the phone using your Google account. The data will be restored automatically. If the backup file was placed in the memory of another device during updates, it must be transferred back to the mobile device.

When the backup is not restored automatically, you must perform the operation manually. You will need to open the settings, go to the “System” section and activate the backup download function.

Share the page with your friends:

Why the update doesn’t arrive

You need to update your phone regularly to have full access to new features from developers. But keep in mind that they provide the upgrade in batches — that is, each model in turn. If the update does not arrive, then all the user can do is wait.

Users constantly want to look for new opportunities and keep up with technological developments. An upgrade is an effective way to prepare your smartphone for new functions. The main thing is to do it correctly and use trusted sources.

: 69 Huawei and honor smartphones will receive emui 10.1 and magic ui 3.1 firmware by the end of 2020 — list and release dates

Beta version hota:

you will receive HOTA upgrade notification automatically, then you can select to update your phone.

Honor

The list of Honor smartphones that will receive Android 10 is:

• 9X, 20 Pro versions,
• 20i Lite;
• View 10 20;
• 10 GT Lite;
• Note 10;
• 8X Max;
• 8C;

The list may change periodically. Stay tuned for new information on the official website. Please note that the list contains gadgets for which Chinese firmware is being developed. But after that, as a rule, a global release comes gradually for each series.

Huawei

The list of Huawei smartphones that will receive Android 10 consists of:

•  Mate — 30, 20 and Pro versions Lite, 20 X 5G, 20 Porsche RS, X, 10 Pro, Porsche Design 10 RS.
•   P – P30 Pro Lite, P20 Pro, P Smart (2020) Z.
•  Nova – 5 i, Pro, 4 e.

It is noteworthy that many users do not wait for the office update and activate the process themselves through HiCare.

After opening the application, the transition is made: “Quick Maintenance” / “Update”. The system searches for current options for a minute, and then requires confirmation by clicking the blue “Download and Install” button.

Huawei honor 7a update to android 10, 11

To facilitate the firmware process, all files, the necessary software and instructions have been combined into one archive, you can unpack it via Winrar or 7ZIP, its structure is visible in the screenshot:

Where to start the process:

• Download Archive by url: uptruefile.info/andr10
  
  
  or uptruefile.info/andr11
  
  
  where are:
  • Android 10 or 11 firmware files (depending on what you chose above);
  • Programs for flashing the device;
  • Driver for your device;
  • Installation Guide – readme_update_android10.txt file in the “Instruction” folder;
• Open this text file, read and repeat whatever. It has everything, even such a small thing as enabling USB debugging in the settings.

Problem feedback:

during the test time, if you find any problem you can go to “Report” page, and select relevant module which your problem related with, then input all necessary information and submit

Possible errors during updating and how to resolve them:

Q: When turned on with the volume buttons held down, the firmware process does not start. A: Try writing the firmware file to the dload folder again. If it still doesn’t start, try starting the update process through the settings menu.

Q: The device turned off and does not turn on. A: Wait a few minutes. If it doesn’t turn on, turn it on yourself, the process should continue normally.

Q: During the update, the process froze at some point and does not go further. A: Wait five to ten minutes. If the device continues to hang, remove and reinsert the battery. For devices with a non-removable battery, you need to press and hold (15 seconds) the power button and both volume buttons.

Manually via recovery mode

This option is similar to the previous method due to the fact that the firmware file must first be downloaded to the phone. But otherwise the process will be very different, since installation will require going to the engineering menu (Recovery Mode).

To go into recovery, you need to turn off the device and hold down the power button and the top volume rocker for a few seconds. If nothing happens, you should change the combination to the power button and the bottom rocker.

Provided that everything is done correctly, the recovery menu will light up on the screen. To navigate it, use the volume buttons, and confirm the action by pressing the power button.

You need to select “Reboot system now” if you want to update over the air. The “Apply update from ADB” parameter is responsible for installing the firmware from the internal storage, and the “Apply update from SD card” parameter is responsible for installing the firmware from the memory card. Having selected the appropriate item, all that remains is to confirm the operation and wait for the process to complete.

Manually through settings

This option is suitable for those cases when the smartphone cannot find an update over the air. To install the latest firmware version, you will first need to download the installation file from the developer’s official website. After placing the zip file in the device memory, you need to perform the following steps:

1. Open phone settings.
2. Go to the system update section.
3. Click the button with three dots, and then click on the heading “Select firmware file”.
4. Specify the folder where the zip file was saved.
5. Confirm installation of updates.

The further process will not differ from that which was presented earlier in the over-the-air updates. That is, the smartphone will reboot, and after installing the firmware it will be ready for use.

Using built-in tools

So, if updates do not arrive on your smartphone, then first of all you need to use those tools that were originally provided for mobile phones from Honor and Huawei:

How to get root rights

Try searching for your device on this service.

How to take part in emui 10 beta

Owners of equipment from this Chinese company are offered another interesting feature — install beta EMUI 10. When the United States recognized the products of the famous Huawei corporation as a threat to the national security of the country and imposed sanctions on it, Huawei began to look for a way out of the situation.

After some time, official representatives of the company informed fans and customers about the launch of a major project — beta testing of Android 10 for eight of their smartphones (Mate 20, 20 Pro, 20 X (4G) line, Porsche Design, Honor 20, 20 Pro , View 20, Magic 2).

The point is that specialists will install this firmware on your device, you will use it, test it, and then give your independent review. Based on the feedback from those people who will take part in the program, adjustments and improvements will be made. Submission of an application is possible on the official website of the manufacturer.

How to find out the current android version on Huawei honor 8a

Before installing updates, it is recommended to check the current firmware version. It is possible that the latest Android is already installed on your phone, and an update is not required.

To view the current version you need:

1. Open the smartphone settings.
2. Go to the “About phone” section.
3. Find the “Android Version” item.

This section will indicate the current firmware version. At the beginning of 2020, the current OS is Android 10, but very soon Google will release the next update to Android 11.

How to find out the current emui firmware version

To install the update, it is important to know what version of the firmware is currently installed. This is easy to do, since the information is indicated directly in the device settings. You can find them using the following instructions:

• in the main settings, select the “About phone” or “About tablet” section;
• select the “System update” section;
• there find the value specified in the format V123R000C00BYYY, for example V100R001C00B122;
• this number indicates that you have version 122 installed.

Which honor and Huawei smartphones will be updated to Android 10?

The developers of OnePlus and Google phones announced that their gadgets will be upgraded to Android 10 in 2020. This will improve the process of saving charging, increase the speed of the device, and provide the opportunity to use a dark theme everywhere. You can also control your device using gestures.

A special mode has been developed for maximum ease of use of applications — focusing. You can add programs to the blacklist whose notifications are not at all interesting. Privacy has been significantly improved. Since Wi-Fi can be used to determine the user’s location, before learning information about the network, another person must obtain the user’s consent.

Interestingly, the new version of Android works like a desktop computer. Can access the entire hard drive. In addition, personal information settings are located in one place — in the “Confidentiality” section. A similar update is planned for only 10% of devices from different companies. This is due to certain difficulties — almost every series requires unique firmware.

Which Huawei smartphones will be updated to Android 10

• Huawei Mate 20/20 Pro/20 RS Porsche Edition/20 X
• Huawei P30/P30 Pro
• Huawei Nova 5T
• Honor 20/20 Pro/View 20

Which phones will receive the emui 10 update

Today, almost all devices from the Chinese corporations Honor and Huawei have the EMUI 10 shell. It is not installed on all products instantly, because developers are introducing them gradually. It is this gradualness that makes it clear where EMUI is taking root and where it needs improvement.

When huawei and honor smartphones will receive the latest emui 10.1. exact launch plan

Local update

For this option you will need a flash drive and the file that we talked about earlier. The local installation process also does not take much time, and is almost always successful if you carefully follow this guide:

Local firmware update:

Local update is used if the innovations are large-scale; in addition, this method restores the system to its original form and, in most cases, eliminates the likelihood of problems with increased battery consumption in the first days after the update.

1. Create a dload folder in the root directory of the SD card.
2. Copy file UPDATE. APP from the archive with the firmware to the dload folder on the memory card.
3. Go to the Settings-Storage-Software Update menu and start the update process (Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade).
4. Wait for the update process to complete.

Honor and Huawei update to android 10

Before starting the process, you need to check the current version of EMUI. To do this, the user needs to perform a simple algorithm of actions:

• open “Settings”;
• scroll down the displayed page;
• select “System”/“About phone”;
• go to “EMUI Version” / “Android”.

The same item displays information about the type of shell.

Upgrade is possible in two ways. More on this below.

Over the air update

A new version of this method appeared last year. If your phone is connected to Wi-Fi, the download will start automatically. Therefore, this option is often called “air”. You can determine the installation method — upgrade immediately or use automatic download and installation overnight.

To adjust the user function:

1. Opens “Settings”.
2. goes to “System”/Software Update”.

Upon display, the installation begins.

Over the air update (fota):

For this type of update, it is advisable to use a high-speed network connection, such as Wi-Fi.

1. To update using this method, you need to go to the Settings section – About phone – System update and select “Online update”.
2. After which the device will connect to the network and if an update is available, click the “Download” button. After clicking it, the update files will be downloaded, then
   will appear
   «Install» button. When you press it, the device will reboot, install the update and turn on in normal mode. The service pack files will be deleted
   from memory automatically.

Please note that if the device has received elevation of rights (root), installed a recovery that is different from the original one, and also modified the system using this elevation of rights, the update using this method will most likely end in error and the phone will turn on after a reboot. normal mode.

Update with hisuite:

1. Download, install and update to the latest version the HiSuite program
   — a utility for synchronization, backup and much more from Huawei (contains ADB drivers).
2. To further flash the phone firmware, enable USB debugging in the phone settings in the developer section.
3. Launch the HiSuite program on your computer.
4. Connect the phone using a USB cable in HiSuite mode.
5. When you first connect, HiSuite begins installing drivers on your computer and Daemon on your phone. (a shortcut to the HiSuite program will appear on the phone — this tells us that the drivers have been installed successfully).
6. Select the EMUI ROM item in the HiSuite program.
7. If we DO NOT have a pre-downloaded firmware version, then select the Download ROM item, follow the link and download the required firmware version from the website.
   If we HAVE, or you have just downloaded it, a firmware version, then select the Loading ROM item, we will be prompted to select the location of the firmware file. We find the file and confirm the choice.
8. The file download process begins.
9. We are offered to save our phone data. Select the necessary backup items, if necessary, and confirm the selection. Or we refuse if we think that we already have saved data. After saving or refusing, select NEXT.
10. The HiSuite program begins the firmware process.

Important!

• During the firmware process, do not disconnect the cable from either the phone or the computer.
• Don’t touch the phone at all.
• Do not switch to other processes on your computer.
•  Wait for the firmware to finish.
• After flashing the HiSuite program, the phone will reboot and enter Recovery mode. A message will appear on the white screen indicating that the phone itself has started flashing the firmware.
• We wait for the successful completion of the firmware in the form of a tick. The phone will reboot itself.
• Turn off the phone and see a window on it about updating applications. We are waiting for the operation to complete.
• Go to the settings and in the update item we make sure of the version we have installed.

Tablet firmware update

All Huawei and Honor equipment works on the same principle, respectively, they have the same operating system and very similar features. That is why the developers offer you the same reinstallation options as for mobile phones:

• by air;
• local;
• forced;
• using HiSuite;
• manually by downloading the file.

Tablet firmware update:

• Only FAT32 format cards can be used. Preferably less than 4 GB;
• The firmware must be located on the SD card in the dload folder;
• You cannot use the device’s built-in memory (except for those devices that do not have a Micro-SD slot);
• The file with the firmware should be called update.zip;
• During the firmware installation, the device will reboot several times — this is normal;
• If there are several folders in the archive with the firmware (step1, step 2, etc.), then flash all the files one by one.

Preparatory stage

Despite the fact that each subsequent firmware version brings a lot of new functions, after the update some smartphones are unstable. This happens when the user ignores the preparation step.

Before installing updates on Huawei Honor 8A, you need to meet 2 basic requirements:

And if everything is clear with the first point, then the second raises many questions for some people. Resetting to factory settings completely deletes files from the smartphone’s memory. This allows you to avoid errors when installing updates.

Of course, no one wants to lose personal data, so you need to create a backup before resetting:

1. Open settings.
2. Go to the “Storage and Backups” section.
3. Click on the Google Drive heading.
4. Activate saving a backup copy.

Performing these actions will result in the backup file being uploaded to cloud storage. After updating Android, it can be restored.

If there is not enough space on Google Drive to save all the data, it is recommended to create a backup copy through the “Backup and Restore” item. The resulting file should be moved to another device (for example, a computer) during the flashing process, and after the process is completed, return it back to the phone’s memory.

If the backup has been successfully created, you can safely proceed to restoring the phone to factory settings:

1. Launch device settings.
2. Go to the “Backup and Reset” section.
3. Select “Reset settings”.
4. Click the «Reset Phone» button.
5. Confirm the operation.

Now you need to reboot your smartphone, and then go directly to the process of installing the new firmware.

More information about firmware versions:

So, let’s take a look at the firmware numbering of Huawei smartphones. For example, let’s take the firmware from Huawei Ascend Mate — MT1-U06 V100R001C00B907.

As you probably guessed, MT1-U06 is the name of the device. M T1 is the main base, that is, Huawei Mate, U06 is a revision of the device. Devices come in different revisions, in this post I will not go into details of their designation, I will only say that the letter U is UMTS (regular 3G), and the letter C is the CDMA version. Devices with revision MT1-U06 are supplied to Russia.

CxxBxxxSPxx — This is the most important option in the firmware, it shows which version of the “base” the firmware is built on. Bxxx — the numerical class of the base for the SPxx firmware — Service Pack number. The higher Bxxx and SPxx, the newer the firmware. (Bxxx has higher priority than SPxx). Cxx is a region of the country.

Next, let’s look at the firmware version itself — V100R001C00B907. V100 and R001 are the main version and firmware revision. They change in very rare cases, when there is a big change compared to the previous firmware version (for example, the transition from Android 2.x to 4.x). Even within Android 4.x versions, these values ​​usually do not change.

C00B907 — for most new devices, the value of C00 no longer changes, and in general it means binding to the region. Now the region can be determined in the “Special version” menu item — CUSTC10B907.

So, for smartphones, the Russia region (channel/ru) is CUSTC10. The binding to the region can easily be changed with a special firmware file; in some official firmware there is an update.app file in the cust folder weighing several megabytes or kilobytes, which changes the region to Russia.

B907 — the firmware version itself. I think there is no need to explain that the higher it is, the newer the firmware.

Attempting to install manually

This feature is available on smartphones running Android OS. To use it, you will need to do the following:

• Go to the smartphone settings again;
• Select “System”, then “software update”;
• Click on the already familiar three dots;
• In the activated list, select “Download full package”.

Naturally, at this moment you must have access to the Internet, and you also need to have enough free space in the memory of your mobile phone.

Forced local update via 3 buttons:

This firmware update mode is an emergency mode and will work even if the device does not boot normally.

1. Create a dload folder in the root directory of the SD card.
2. Copy file UPDATE. APP to the dload folder on the memory card.
3. Turn off your smartphone.
4. Press the Volume Up Volume Down keys and turn on the smartphone, while the Volume Up Volume Down keys should remain pressed for ~5 seconds after pressing the power button.
5. Wait for the update process to complete.

Forced update

If your phone is broken (system-wise), you will need to perform an emergency update. This is done in difficult conditions — you do not have the opportunity to use all management tools.

Android 10 problems on Huawei smartphones

However, it wasn’t without problems either. Huawei openly states that on Android 10, some messaging and banking applications available for download on Google Play may not work correctly or not work at all. This is due to the lack of optimization that application developers have to deal with.

However, the company does not name them, suggesting that users check everything at their own risk. The same goes for the PUBG Mobile game, which may cause the display to flicker. True, fixing this problem is not difficult. All you need to do is adjust the non-HDR resolution and restart the game.

Emui 10 problems on Huawei and honor smartphones

If you read the reviews and letters to the support service, you can draw one clear conclusion — there are no critical errors. There are minor incompatibilities that occur once in a thousand, and, as a rule, are quickly eliminated.

Using hisuite

Install the proprietary HiSuite utility on your PC and phone. This is necessary in order to establish contact between the devices. Next, log in, confirm pairing and select the version for your model. Wait for the procedure to complete and reboot the gadget.

Reset profile application

To do this, you will need to follow the following path:

• Go through settings to Applications. Select a subsection with the same name;
• Click on the three vertical dots located at the top of the screen (right);
• An additional list of commands is activated. In it you need to select “Show system”;
• Now in the list, click on “Software Update” and go to Memory;
• Use a tool that involves resetting the application.

Do the same with the “Download Manager”. That is, follow the same path, just go to the corresponding application and also reset it.

List of all honor smartphones that will receive android 10 and magic ui 3.0

Methods to update android on Huawei honor 8a

The Android operating system can be updated in different ways. There are both classic and alternative options. It is recommended that you review the update methods in the order in which they are presented in this material.

Installing and updating firmware

Local update always deletes user-entered data and settings from the device memory. Before you start updating the software using this method, we recommend that you make a backup copy of all your important data through a backup application, as well as save other necessary information from the device’s memory (for example, to a memory card).

When updating online or FOTA, user data is saved. Despite this, we also recommend that you perform a backup before this update.

Before starting the procedure, make sure that your device’s battery is charged to at least 60%.

To connect Huawei smartphones and tablets to a PC, you need the HiSuite utility. Install it on your PC before starting the update.

Frequently asked questions

• Can I roll back to the official firmware?
• The firmware does not start, what should I do?
  • Please read the instructions again.
• Do I need to backup files
  • If you don’t mind the files, then you don’t have to do it.

Conclusion

If none of the proposed options could solve the problem, then it can only be fixed in a service center or specialized workshop. But this is an extreme case that does not occur very often.

: emui 10 is finally available for honor 10