Dump:<response value=\"nak\" rawmode=\"false\"”

alternative browser

im getting errors how to solve this

• Please enter your passwor…
• Mediatek (MTK) Auto TWRP …
• Unable to connect to kern…
• BV4900 Pro black screen a…
• mediatekdriver
• How to write or change IM…
• HELP
• Real 1:1 Firmware for S21…
• Bootloader unlock problem
• Itel, Android 10: Files i…

• Forum posts:
• Forum threads:
• Members:
• Latest member:

So is there a tool that can manually format data from address to address in HiSilicon Kirin chipset?
Similar to that feature in SP Flash Tool.
There is FRP locked Huawei P Smart with HiSilicon Kirin 659. I found the FRP address for 655, but i know it won’t work in later versions because the addresses won’t be the same.
The only tool i found is MRT HW which formats FRP locked Kirin chipsets, but i don’t have the dongle so i hope when i find log i could just see the HEX addresses and format in this range.

After edit my logo.bin tecno spark2 when flashe it show current logo no change 
How fix

Hello guys,
It’s been a while but now as the title said, my phone got bricked because I flashed a broken twrp recovery and since then my phone is constantly bootlooping till I guess it shuts down due to low battery. But after, even by charging for hours, the phone won’t boot up anymore. 
However, the «mediatek preloader VCOM» port still pops up when I plugged it in my pc. Because we know that SP flash tool won’t work with my phone (secure boot), I wonder if using your newly founded SoftwareDownload (Transsion AfterSale) tool will help me out.
So, because the thread is a step by step flashing the firmware guide, and I only want to flash my stock recovery back, could you please tell me if there’s a way to select only one partition to flash using this tool? And if so, how to define it?
Of course, if there is another way to fix my issue, please let me know.
Thanks a lot for your amazing work
RMT

pls am a new member here.I want to know if QFIL can flash infinix hot 6 pro(x608)

infinix hot s3 x573 firmware

How do I fix this

I want to backup the device ROM but nothing is there to backup

Hello, I have itel it2150 which has password. I tried to flash it with the latest version of spd upgrade tool, the error message I got is your driver version is 2.0.0.114 is too low. I don’t know how to install the version and install the newer one.

The older version I use gives me uart error

Please, if i can get a NVRAM image to download or anything that can solve my problem it will be nice.

Here what i have for Dialing : *#*#4636#*#* in the dialer. 

After rooting my phone using magisk 
I created a Twrp recovery 
But I’m not having access to my storage to install zip files

r0styr0x , in the recovery only with complete cleaning, if I’m not mistaken.

I stitched REDMI 7A, a mistake, the log attached — help solve this problem

Type of: A new version
Version: 5.3.714.36
Short description: Update to the current version of 07/15/2020

Help the PLS guys, the bodies reboots without stopping, Redmi Note 8 Pro, in FastBoot it comes in Recovery, I haven’t tried to install TWRP on it, but everything is not the plan go, and it seems to me that the bodies covered, who knows how to solve the problem , Help, begging !!!!

Hello, please tell me how much time is the flashing?

Post has been editeddudikoff1980 — 28.07.20, 00:45

dudikoff1980,
And I tried * stretch * program?

Man1zzz ,
Neither the frame is not expanding, nor the slider is not shifted. Nonsense. And after all I was flashing.

dudikoff1980,
Update then on the latest version, you, as I see, is very old.

Man1zzz ,
I’m with the new and started. And went to older. On all versions the same thing.
Button Flash should be regardless of whether the phone is connected or not?

Introduction came and solved my problem with the missing Flash button. Rather, she was always present, but was not visible due to the fact that in the personalization in the tab screen there was an increase of 125%.

dudikoff1980,
Yeah, should. Well, thank God

It does not make a backup, just stitches?

igorrius2,
Yes

Hello. I write here for the first time, and then because the branch brightened and did not yet find the answer to his question. Maybe someone came across and help me. Xiami Mi A3, after 3 unsuccessful attempts to establish a TVP phone burtly, a permanent Fast Booth and after each of each of 3 times I reflash the phone to the official firmware through the flash software about successfully. Today, the usual seemingly, an ordinary case, again failure in the firmware of the TWRP and during firmware through the flash software began to climb the status of $ PAUSE in the load row. I tried and firmware different and drivers reinstalled and the versions of the program even put others, nothing helped. Please help advice, what could it be and how to eliminate it?

Post has been editedPascal_Serwill — 04.08.20, 18:56

And you can make a backup using SP Flash Tool, and this program is part of this program,

Or she is «trimmed» here and better Download SP Flash Tool separately?

I write here for the first time, and then because the branch brightened and did not yet find the answer to his question. Maybe someone came across and help me. Xiami Mi A3, after 3 unsuccessful attempts to establish a TVP phone bout,

First of all, it is necessary to write and ask in this theme forum:Xiaomi Mi A3 — Discussion

Post has been editedSkGalkin — 11.08.20, 13:25

Hello, I have a xiaomi device, trying to download with QFIL, i get the below messages, is there any way to force download?

02:46:05: INFO: TARGET SAID: ‘ERROR: Only nop and sig tag can be recevied before authentication.’
02:46:05: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
——————————————————————————————-
<?xml version=»1.0″ encoding=»UTF-8″ ?>
<data>
<response value=»NAK» rawmode=»false» /></data>
——————————————————————————————-

(12-06-2019, 03:02 AM)notchless Wrote:  Hello, I have a xiaomi device, trying to download with QFIL, i get the below messages, is there any way to force download?
02:46:05: INFO: TARGET SAID: ‘ERROR: Only nop and sig tag can be recevied before authentication.’
02:46:05: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
——————————————————————————————-
<?xml version=»1.0″ encoding=»UTF-8″ ?>
<data>
<response value=»NAK» rawmode=»false» /></data>
——————————————————————————————-

whats the full device model? , whats wrong with the phone and how did the problem begin?
what are you trying to flash? and where did you get what you’re trying to flash from?

Hello, it is a note 7 pro (violet). Chinese version, but unfortunately I have flashed global version and relocked bootloader.

I’m trying to go back to chinese official rom.

I’m trying to edit the ELF to bypass the authentication step, also reversed engineer the xiaomi authentication EXE, but auth is done by the device itself. Device send a blob, it is sent to xiaomi servers then answer goes back to device.

(19-06-2019, 05:21 PM)notchless Wrote:  Hello, it is a note 7 pro (violet). Chinese version, but unfortunately I have flashed global version and relocked bootloader.

I’m trying to go back to chinese official rom.

what was the outcome after doing this, can the phone still power on OR it’s now totally dead?
are you also able to boot the phone into edl mode?

Thanks for your answer. The phone boots, but it is in looped state, and with bootloader locker. It is a common state with xiaomi phones when you flash the wrong rom (Global in a chinese phone)

The only way to fix is by reflashing a chinese rom. And in this state we can only reflash it by the EDL mode (shorting the pins), adb command will not work because of locked bootloader.

(20-06-2019, 02:40 PM)notchless Wrote:  Thanks for your answer. The phone boots, but it is in looped state, and with bootloader locker. It is a common state with xiaomi phones when you flash the wrong rom (Global in a chinese phone)

The only way to fix is by reflashing a chinese rom. And in this state we can only reflash it by the EDL mode (shorting the pins), adb command will not work because of locked bootloader.

so why don’t you power off the phone then boot into fastboot using vol down + power button (or vol up + power button then select fastboot mode) >> unlock bootloader then reflash stock rom using fastboot or miflash tool

(20-06-2019, 04:45 PM)X3non Wrote:  

(20-06-2019, 02:40 PM)notchless Wrote:  Thanks for your answer. The phone boots, but it is in looped state, and with bootloader locker. It is a common state with xiaomi phones when you flash the wrong rom (Global in a chinese phone)

The only way to fix is by reflashing a chinese rom. And in this state we can only reflash it by the EDL mode (shorting the pins), adb command will not work because of locked bootloader.

so why don’t you power off the phone then boot into fastboot using vol down + power button (or vol up + power button then select fastboot mode) >> unlock bootloader then reflash stock rom using fastboot or miflash tool

Bootloader can’t be unlocked, because it is not linked to any xiaomi account. As the system will never boot, I can not associate it to any xiaomi account (this operation has to be done within the OS).

(This post was last modified: 20-06-2019, 04:49 PM by notchless.)

(20-06-2019, 04:47 PM)notchless Wrote:  Bootloader can’t be unlocked, because it is not linked to any xiaomi account. As the system will never boot, I can not associate it to any xiaomi account (this operation has to be done within the OS).

i’m aware you need an authorized account
in any case, i really can’t help you with a reverse engineer process and unless you really know what you’re doing, you might end up making your phone worse than it already is

(This post was last modified: 21-06-2019, 03:55 PM by X3non.)

(20-06-2019, 04:47 PM)notchless Wrote:  Bootloader can’t be unlocked, because it is not linked to any xiaomi account. As the system will never boot, I can not associate it to any xiaomi account (this operation has to be done within the OS).

Why don’t you just go with EDL (if you know how to dismantle and join the right points) + Authorized Mi account? I’ve sent you a PM about that

We have a reply schedule for Free Support. Please upgrade to Private Support if you can’t wait.

Pada umumnya flashing Xiaomi dianjurkan menggunakan Mi Flashtool, metode ini merupakan yang paling ampuh dibandingkan yang lainnya. Mi Flash sendiri sangat bisa kita andalkan untuk Mengatasi Xiaomi Bootloop.

Meskipun paling ampuh, bukan berarti tidak ada kendala saat melakukan flashing Xiaomi via Mi flashtool.

Dari pengalaman yang sudah kami alami, masalah yang sering terjadi adalah ketika proses flashing sedang berjalan kadang mengalami kegagalan.

Contohnya terjadi error Not Enough Storage is Available to Process this Command.

Kurang lebih artinya adalah Ruang penyimpanan tidak tersedia untuk menjalankan perintah ini padalah kapasitas memory penyimpanan masih cukup lega.

Jika anda mengalami kendala saat melakukan flashing via yang menyebabkan error atau gagal, anda harus mengetahui apa penyebab kesalahannya. Dengan begitu anda akan dengan mudah menemukan solusinya.

Pada artikel ini akan kami bahas mengenai beberapa maslah yang muncul saat flashing Xiaomi via Mi Flashtool dan cara mengatasinya.

Biasanya jika terjadi error akan muncul notifikasi berwarna merah pada Mi Flashtool.

Jenis errornya berbeda – beda, untuk lebih jelasnya silakan baca penjelasan berikut ini.

KODE ERRoR mi flash

Cannot Receive Hello Packet

Error seperti ini pada umumnya terjadi ketika melakukan flahing via EDL Mode dan sering terjadi pada Mi Flashtool 2016 dan lebih tinggi. Tetapi ada juga yang terjadi pada fastboot mode.

Cara Pertama

1. Coba ganti kabel Usb dengan yang lebih bagus, apabila masih terjadi error coba ganti PC/laptop dengan yang lain. Bisa jadi error terjadi karena port Usb yang sudah tidak berfungsi dengan baik.
2. Nonaktifkan Driver Signature pada Windows anda. Menurut beberapa orang yang sharing di grup error seperti ini sering terjadi pada pengguna windows 10 versi 64 bit. Error ini bisa diatasi dengan menonaktifkan Driver Signature
3. Install ulang Android Usb Driver Xiaomi
   Masuk ke Device Manager, lalu pastikan terdapat tanda seru ! pada bagian Android Adb Interface jika anda akan melakukan flashing mode fastboot dan qualcomm hs-usb Qdloader 9008 (COMxx)

Cara Kedua

Coba ganti Mi Flashtool dengan versi yang lain. Misalnya jika ponsel Xiaomi yang akan di flashing adalah versi lawas, sebaiknya gunakan Mi Flashtoll 2015.

Apabila ponsel Xiaomi anda termasuk kedalam versi terbaru, gunakanlah Mi Flashtools versi 2016 keatas.

Cara Ketiga

Lepas socket baterai dan Usb dari mesin, kemudian pasangkan kembali. Jika sudah masuk kembali ke fastboot mode atau EDL Mode lalu mulai proses flashingnya.

Jika anda mengikuti cara yang ketiga, maka harus membuka kesing belakang smartphone anda.

Metode ini memang sedikit ribet dan membutuhkan keberanian. Jika anda sayang terhadap smartphone yang anda gunakan sebaiknya serahkan cara ini ke orang yang lebih profesional.

Error Not Enough Storage is Available to Process this Command

Solusi untuk mengatasi masalah Error Not Enough Storage is Available to Process this Command adalah dengan cara mengganti Mi Flashtool dengan versi yang paling terbaru.

Jika anda menggunakan Mi Flash Tools versi 20150601, coba dengan Mi Flashtools versi 20150731.

Apabila masih tetap error, coba ganti lagi ke versi 20151028 dan seterusnya.

Error Unspecified error (0x80004005:error:cannot load ” : No Error)

Masalah Error Unspecified error 0x8000400 terjadi karena ROM hasil ekstrak diletakkan dalam folder yang terdapat spasi pada nama folder tersebut.

Cara mengtasinya adalah dengan memindahkan ROM (folder hasil ekstrak tadi) ke drive C:/ ataupun D:/

Error Missmatching image and device error

Masalah seperti ini biasanya terjadi karena anda menggunakan ROM Fastboot yang tidak sesuai dengan codename tipe HP Xiaomi yang akan di flash ulang.

Solusi untuk mengatasi Error Missmatching image adalah dengan mengganti ROM Fastboot yang sesuai dengan Codename ponsel Xiaomi anda.

Error remote:flashing not alllowed in lock state

Error seperti ini biasanya terjadi ketika anda akan mengganti ROM ke tipe yang berbeda melalui mode EDL tanpa Unlock bootloader.

Contohnya ingin berpindah dari ROm China ke ROM Global stable maupun sebaliknya.

Agar tidak terjadi Error remote:flashing not alllowed in lock state sebaiknya jangan berpindah ROM.

Kalaupun ingin berpindah ROM usahakan ponsel Xiaomi anda harus sudah unlock bootloader.

Error Length cannot less than zero

Masalah ini terjadi ketika anda mengklik Refresh pada Mi Flashtool. Seharus nya device anda yang terdeteksi, tetapi malah muncul Error Length cannot less than zero.

Metode untuk memperbaikai error ini adalah dengan menggunakan MiFlashSetup-Beta.zip

Error Receiving Hello Packet, Ping Target Failed

Error seperti ini terjadi ketika anda akan flashing HP Xiomi lawah menggunakan Mi Flash versi terbaru.

Solusinuntuk mengatasinya adalah dengan menyesuaikan versi Mi Flashtool dengan versi HP anda.

Itulah tadi beberapa masalah yang sering muncul saat melakukan flashing Xiaomi menggunakan Mi FLashtool.

Pernah mengalami Mi Flash Error tapi belum ada di daftar kami diatas? Tuliskan dikomen agar kami bisa bantu menganalisa dan mengupdate artikel ini

[9:25:15 COM3]:MiFlash 2017.4.25.0
[9:25:15 COM3]:[COM3]:start flash.
[9:25:15 COM3]:received hello packet
[9:25:15 COM3]:download programmer C:\Users\BARDAR\Desktop\kenzo_global_images_V8.5.6.0.MHOMIED_20170822.0000.00_6.0_global\images\prog_emmc_firehose_8976_ddr.mbn
[9:25:15 COM3]:sahara read data:imgID 13, offset 0,length 52
[9:25:15 COM3]:sahara read data:imgID 13, offset 52,length 288
[9:25:15 COM3]:sahara read data:imgID 13, offset 4096,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 8192,length 2632
[9:25:15 COM3]:sahara read data:imgID 13, offset 330124,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 334220,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 338316,length 3876
[9:25:15 COM3]:sahara read data:imgID 13, offset 342192,length 2504
[9:25:15 COM3]:sahara read data:imgID 13, offset 12288,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 16384,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 20480,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 24576,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 28672,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 32768,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 36864,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 40960,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 45056,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 49152,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 53248,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 57344,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 61440,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 65536,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 69632,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 73728,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 77824,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 81920,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 86016,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 90112,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 94208,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 98304,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 102400,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 106496,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 110592,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 114688,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 118784,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 122880,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 126976,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 131072,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 135168,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 139264,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 143360,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 147456,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 151552,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 155648,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 159744,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 163840,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 167936,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 172032,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 176128,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 180224,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 184320,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 188416,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 192512,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 196608,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 200704,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 204800,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 208896,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 212992,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 217088,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 221184,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 225280,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 229376,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 233472,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 237568,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 241664,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 245760,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 249856,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 253952,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 258048,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 262144,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 266240,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 270336,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 274432,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 278528,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 282624,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 286720,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 290816,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 294912,length 2620
[9:25:15 COM3]:sahara read data:imgID 13, offset 297532,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 301628,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 305724,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 309820,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 313916,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 318012,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 322108,length 4096
[9:25:15 COM3]:sahara read data:imgID 13, offset 326204,length 3920
[9:25:15 COM3]:sahara read end imgID:13 status:0
[9:25:15 COM3]:Send done packet
[9:25:15 COM3]:file C:\Users\BARDAR\Desktop\kenzo_global_images_V8.5.6.0.MHOMIED_20170822.0000.00_6.0_global\images\prog_emmc_firehose_8976_ddr.mbn transferred successfully
[9:25:17 COM3]:send nop command
[9:25:17 COM3]:send command:<?xml version="1.0" ?><data><nop verbose="0" value="ping"/></data>
[9:25:17 COM3]:get response from target
[9:25:17 COM3]:dump:<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data>
[9:25:18 COM3]:flashSuccess False
[9:25:18 COM3]:isFactory False CheckCPUID False
[9:25:18 COM3]:before:flashSuccess is False set IsUpdate:True set IsDone True
[9:25:18 COM3]:after:flashSuccess is False set IsUpdate:false set IsDone true
[9:25:18 COM3]:[9:25:17 COM3]:dump:<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data>

C:\Tools>fastboot flash bluetooth_a C:\Tools\images\bluetooth.img ||
Sending 'bluetooth_a' (556 KB) OKAY [ 0.023s]
Writing 'bluetooth_a' FAILED (remote: 'Error flashing partition : Device Error')
Finished. Total time: 5.165s
"Flash bluetooth_a error"[/QUOTE]
2. Пробую шить через MiFlash в режиме EDL (как с переводом в EDL из под fastboot, так и при помощи test-понитов), телефон определяется, вешается на COM-порт, начинаем шить и получаем:
[B]Лог процесса прикрепил.[/B]
[QUOTE][22:38:08]:7 COM7 8,5165241s [22:38:08 COM7]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: SDCC Error 3 (3)"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Write Failed sector 512, size 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to write 1 slot 0, partition 512, start_sector 97 num_sectors 0, error 3"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 609 and TotalSectorsToProgram 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" />
</data>

G:\tools>fastboot oem device-info
(bootloader) V
G:\tools>fastboot getvar all
(bootloader) crc:1
(bootloader) anti:1
(bootloader) token:x6OrFmF+HCOtPh3LRfTAGbj+wJ8=
(bootloader) hw-revision:10000
(bootloader) unlocked:yes
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:4241
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) erase-block-size: 0x200
(bootloader) logical-block-size: 0x200
(bootloader) variant:SDM EMMC
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xBB77F7E00
(bootloader) partition-type:vendor_b:raw
(bootloader) partition-size:vendor_b: 0x80000000
(bootloader) partition-type:vendor_a:raw
(bootloader) partition-size:vendor_a: 0x80000000
(bootloader) partition-type:system_b:ext4
(bootloader) partition-size:system_b: 0xC0000000
(bootloader) partition-type:system_a:ext4
(bootloader) partition-size:system_a: 0xC0000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x10000000
(bootloader) partition-type:boot_b:raw
(bootloader) partition-size:boot_b: 0x4000000
(bootloader) partition-type:boot_a:raw
(bootloader) partition-size:boot_a: 0x4000000
(bootloader) partition-type:minidump:raw
(bootloader) partition-size:minidump: 0x8000000
(bootloader) partition-type:rawdump:raw
(bootloader) partition-size:rawdump: 0x8000000
(bootloader) partition-type:modem_b:raw
(bootloader) partition-size:modem_b: 0xC000000
(bootloader) partition-type:modem_a:raw
(bootloader) partition-size:modem_a: 0xC000000
(bootloader) partition-type:logdump:raw
(bootloader) partition-size:logdump: 0x4000000
(bootloader) partition-type:persistbak:raw
(bootloader) partition-size:persistbak: 0x2000000
(bootloader) partition-type:persist:raw
(bootloader) partition-size:persist: 0x2000000
(bootloader) partition-type:splash:raw
(bootloader) partition-size:splash: 0x4000000
(bootloader) partition-type:mdtp_b:raw
(bootloader) partition-size:mdtp_b: 0x2000000
(bootloader) partition-type:mdtp_a:raw
(bootloader) partition-size:mdtp_a: 0x2000000
(bootloader) partition-type:bk1:raw
(bootloader) partition-size:bk1: 0x700000
(bootloader) partition-type:bluetooth_b:raw
(bootloader) partition-size:bluetooth_b: 0x100000
(bootloader) partition-type:dsp_b:raw
(bootloader) partition-size:dsp_b: 0x1000000
(bootloader) partition-type:dsp_a:raw
(bootloader) partition-size:dsp_a: 0x1000000
(bootloader) partition-type:modemst2:raw
(bootloader) partition-size:modemst2: 0x800000
(bootloader) partition-type:modemst1:raw
(bootloader) partition-size:modemst1: 0x800000
(bootloader) partition-type:fsg:raw
(bootloader) partition-size:fsg: 0x800000
(bootloader) partition-type:logfs:raw
(bootloader) partition-size:logfs: 0x800000
(bootloader) partition-type:devinfo:raw
(bootloader) partition-size:devinfo: 0x800000
(bootloader) partition-type:misc:raw
(bootloader) partition-size:misc: 0x400000
(bootloader) partition-type:xbl_b:raw
(bootloader) partition-size:xbl_b: 0x380000
(bootloader) partition-type:xbl_a:raw
(bootloader) partition-size:xbl_a: 0x380000
(bootloader) partition-type:sti:raw
(bootloader) partition-size:sti: 0x200000
(bootloader) partition-type:bluetooth_a:raw
(bootloader) partition-size:bluetooth_a: 0x100000
(bootloader) partition-type:keymaster_b:raw
(bootloader) partition-size:keymaster_b: 0x100000
(bootloader) partition-type:keymaster_a:raw
(bootloader) partition-size:keymaster_a: 0x100000
(bootloader) partition-type:mdtpsecapp_b:raw
(bootloader) partition-size:mdtpsecapp_b: 0x400000
(bootloader) partition-type:mdtpsecapp_a:raw
(bootloader) partition-size:mdtpsecapp_a: 0x400000
(bootloader) partition-type:tz_b:raw
(bootloader) partition-size:tz_b: 0x400000
(bootloader) partition-type:tz_a:raw
(bootloader) partition-size:tz_a: 0x400000
(bootloader) partition-type:devcfg_b:raw
(bootloader) partition-size:devcfg_b: 0x100000
(bootloader) partition-type:devcfg_a:raw
(bootloader) partition-size:devcfg_a: 0x100000
(bootloader) partition-type:toolsfv:raw
(bootloader) partition-size:toolsfv: 0x100000
(bootloader) partition-type:ddr:raw
(bootloader) partition-size:ddr: 0x100000
(bootloader) partition-type:dip:raw
(bootloader) partition-size:dip: 0x100000
(bootloader) partition-type:abl_b:raw
(bootloader) partition-size:abl_b: 0x100000
(bootloader) partition-type:abl_a:raw
(bootloader) partition-size:abl_a: 0x100000
(bootloader) partition-type:cmnlib64_b:raw
(bootloader) partition-size:cmnlib64_b: 0x100000
(bootloader) partition-type:cmnlib_b:raw
(bootloader) partition-size:cmnlib_b: 0x100000
(bootloader) partition-type:cmnlib64_a:raw
(bootloader) partition-size:cmnlib64_a: 0x100000
(bootloader) partition-type:cmnlib_a:raw
(bootloader) partition-size:cmnlib_a: 0x100000
(bootloader) partition-type:pmic_b:raw
(bootloader) partition-size:pmic_b: 0x80000
(bootloader) partition-type:pmic_a:raw
(bootloader) partition-size:pmic_a: 0x80000
(bootloader) partition-type:hyp_b:raw
(bootloader) partition-size:hyp_b: 0x80000
(bootloader) partition-type:hyp_a:raw
(bootloader) partition-size:hyp_a: 0x80000
(bootloader) partition-type:rpm_b:raw
(bootloader) partition-size:rpm_b: 0x80000
(bootloader) partition-type:rpm_a:raw
(bootloader) partition-size:rpm_a: 0x80000
(bootloader) partition-type:frp:raw
(bootloader) partition-size:frp: 0x80000
(bootloader) partition-type:keystore:raw
(bootloader) partition-size:keystore: 0x80000
(bootloader) partition-type:msadp:raw
(bootloader) partition-size:msadp: 0x40000
(bootloader) partition-type:apdp:raw
(bootloader) partition-size:apdp: 0x40000
(bootloader) partition-type:oops:raw
(bootloader) partition-size:oops: 0x20000
(bootloader) partition-type:storsec:raw
(bootloader) partition-size:storsec: 0x20000
(bootloader) partition-type:vbmeta_b:raw
(bootloader) partition-size:vbmeta_b: 0x10000
(bootloader) partition-type:vbmeta_a:raw
(bootloader) partition-size:vbmeta_a: 0x10000
(bootloader) partition-type:sec:raw
(bootloader) partition-size:sec: 0x5000
(bootloader) partition-type:ssd:raw
(bootloader) partition-size:ssd: 0x8000
(bootloader) partition-type:limits:raw
(bootloader) partition-size:limits: 0x8000
(bootloader) partition-type:fsc:raw
(bootloader) partition-size:fsc: 0x2000
(bootloader) partition-type:dpo:raw
(bootloader) partition-size:dpo: 0x2000
(bootloader) partition-type:switch:raw
(bootloader) partition-size:switch: 0x2000
(bootloader) has-slot:modem:yes
(bootloader) has-slot:system:yes
(bootloader) current-slot:b
(bootloader) has-slot:boot:yes
(bootloader) slot-retry-count:b:6
(bootloader) slot-unbootable:b:no
(bootloader) slot-successful:b:yes
(bootloader) slot-retry-count:a:6
(bootloader) slot-unbootable:a:no
(bootloader) slot-successful:a:yes
(bootloader) slot-count:2
(bootloader) secure:yes
(bootloader) serialno:2871ce4
(bootloader) product:jasmine
(bootloader) max-download-size:536870912
(bootloader) kernel:uefi
all:

XDA Forums

So, I out my Phone to run some Youtube yesterday (it was 90% chargfed) and it stopped playback in 5 minutes and I fell asleep. In the morning I could see a display showing youtube at 20% brightness. After I pressed the power button screen went black and after that, I can not power the device up or enter fastboot, there is also nothing after I charge it.

Once connected to PC I can see it in EDL in MiFlash. I found out that there is a restriction by Xiaomi to flash from EDL nowadays. I googled and found the workaround: https://www.droidwin.com/fix-mi-account-authorization-unbrick-xiaomi-edl-mode/

I did it and after some attempts, I am finally stuck with this error which I can not find any refers to:

Here are the logs:

[18:26:24]:lsusb path:"C:\XiaoMi\MiFlash20191206\Source\ThirdParty\Qualcomm\fh_loader\lsusb.exe"
[18:26:24]:ls ubs :Standard Serial over Bluetooth link (COM6)
Standard Serial over Bluetooth link (COM4)
Standard Serial over Bluetooth link (COM5)
Qualcomm HS-USB QDLoader 9008 (COM10)
[18:26:24]:vboytest HubPath:
[18:26:24]:vboytest HubPath: USB#ROOT_HUB30#4&73f3995&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:26:24]:Specified cast is not valid.: at XiaoMiFlash.code.Utility.TreeViewUsbItem.AddPortNode(String HubPath, Int32 NumberOfPorts)
[18:26:24]:vboytest HubPath: USB#ROOT_HUB30#5&1247dd3&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:26:24]:vboytest HubPath: USB#VIA_ROOT_HUB#5&7d0f70f&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:26:24]:vboytest HubPath:
[18:26:24]:GetScriptDevices
[18:26:24]:Specified cast is not valid. at XiaoMiFlash.code.Utility.UsbDevice.GetAndroidDevices(TreeViewUsbItem item, List`1& outItems)
[18:26:24]:Specified cast is not valid. at XiaoMiFlash.code.Utility.UsbDevice.GetAndroidDevices(TreeViewUsbItem item, List`1& outItems)
[18:26:24]:add device COM10 index 10
[18:26:27]:lsusb path:"C:\XiaoMi\MiFlash20191206\Source\ThirdParty\Qualcomm\fh_loader\lsusb.exe"
[18:26:27]:ls ubs :Standard Serial over Bluetooth link (COM6)
Standard Serial over Bluetooth link (COM4)
Standard Serial over Bluetooth link (COM5)
Qualcomm HS-USB QDLoader 9008 (COM10)
[18:26:27]:vboytest HubPath:
[18:26:27]:vboytest HubPath: USB#ROOT_HUB30#4&73f3995&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:26:27]:Specified cast is not valid.: at XiaoMiFlash.code.Utility.TreeViewUsbItem.AddPortNode(String HubPath, Int32 NumberOfPorts)
[18:26:27]:vboytest HubPath: USB#ROOT_HUB30#5&1247dd3&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:26:27]:vboytest HubPath: USB#VIA_ROOT_HUB#5&7d0f70f&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[18:26:27]:vboytest HubPath:
[18:26:27]:GetScriptDevices
[18:26:27]:Specified cast is not valid. at XiaoMiFlash.code.Utility.UsbDevice.GetAndroidDevices(TreeViewUsbItem item, List`1& outItems)
[18:26:27]:Specified cast is not valid. at XiaoMiFlash.code.Utility.UsbDevice.GetAndroidDevices(TreeViewUsbItem item, List`1& outItems)
[18:26:27]:FlashingDevice.flashDeviceList.Remove COM10
[18:26:27]:add device COM10 index 10
[18:26:27]:Thread start,thread id 27,thread name COM10
[18:26:57]:Thread stopped, thread id 27, thread name COM10

[18:26:40]:10 COM10 12.5074169s [18:26:40 COM10]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication."/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" />
</data>
[18:26:57]:10 COM10 30.0098084s Root element is missing.

[18:26:27 COM10]:MiFlash 2019.12.6.0
[18:26:27 COM10]:flash in thread name:COM10,id:27
[18:26:27 COM10]:flash in thread name:COM10,id:27
[18:26:27 COM10]:[COM10]:start flash.
[18:26:28 COM10]:cannot receive hello packet,MiFlash is trying to reset status!
[18:26:29 COM10]:try to reset status.
[18:26:29 COM10]:Switch mode back
[18:26:29 COM10]:cannot receive hello packet,MiFlash is trying to reset status!
[18:26:30 COM10]:received hello packet
[18:26:30 COM10]:programmertype: 0
[18:26:30 COM10]:vboytest:D:\flash\images
[18:26:30 COM10]:download programmer file: D:\flash\images\prog_emmc_firehose_Sdm660_ddr.elf
[18:26:30 COM10]:download programmer D:\flash\images\prog_emmc_firehose_Sdm660_ddr.elf
[18:26:38 COM10]:Send done packet
[18:26:38 COM10]:file D:\flash\images\prog_emmc_firehose_Sdm660_ddr.elf transferred successfully
[18:26:40 COM10]:send nop command
[18:26:40 COM10]:send command:<?xml version="1.0" ?><data><nop verbose="0" value="ping"/></data>
[18:26:40 COM10]:get response from target
[18:26:40 COM10]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Binary build date: Oct 26 2018 @ 09:56:38"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Chip serial num: 2373905150 (0x8d7eeafe)"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Supported Functions: program configure nop sig firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase "/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Binary build date: Oct 26 2018 @ 09:56:38
"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="fh.attrs.Verbose is set to 0"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Chip serial num: 2373905150 (0x8d7eeafe)"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Supported Functions: program configure nop sig firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase "/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" />
</data>
[18:26:40 COM10]:send configure command
[18:26:40 COM10]:send command:<?xml version="1.0" ?><data><configure verbose="0" AlwaysValidate="0" ZlpAwareHost="1" MaxPayloadSizeToTargetInBytes="131072" MemoryName="emmc" SkipStorageInit="0"/></data>
[18:26:40 COM10]:get response from target
[18:26:40 COM10]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication."/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" />
</data>
[18:26:40 COM10]:flashSuccess False
[18:26:40 COM10]:isFactory False CheckCPUID False
[18:26:40 COM10]:before:flashSuccess is False set IsUpdate:True set IsDone True
[18:26:40 COM10]:after:flashSuccess is False set IsUpdate:false set IsDone true
[18:26:40 COM10]:no Binary dump
[18:26:41 COM10]:no Binary dump
[18:26:42 COM10]:no Binary dump
[18:26:42 COM10]:edl authentication
[18:26:42 COM10]:GetUserInfo
[18:26:55 COM10]:AuthFlash
[18:26:55 COM10]:need edl authentication.
[18:26:55 COM10]:authentication edl.
[18:26:55 COM10]:send command:<?xml version="1.0" ?><data> <sig TargetName="req" verbose="1"/></data>
[18:26:55 COM10]:get response from target
[18:26:55 COM10]:no Binary dump
[18:26:56 COM10]:no Binary dump
[18:26:56 COM10]:no Binary dump
[18:26:57 COM10]:no Binary dump
[18:26:57 COM10]:System.Xml.XmlException: Root element is missing. at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.ParseDocumentContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at System.Xml.XmlDocument.LoadXml(String xml) at XiaoMiFlash.code.bl.SerialPortDevice.dlAuth() at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit) at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.ParseDocumentContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at System.Xml.XmlDocument.LoadXml(String xml) at XiaoMiFlash.code.bl.SerialPortDevice.dlAuth() at XiaoMiFlash.code.bl.SerialPortDevice.ConfigureDDR(Int32 intSectorSize, Int32 buffer_sectors, String ddrType, Int32 m_iSkipStorageInit) at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[18:26:57 COM10]:no provision exit:COM10
[18:26:57 COM10]:flashSuccess False
[18:26:57 COM10]:isFactory False CheckCPUID False
[18:26:57 COM10]:before:flashSuccess is False set IsUpdate:True set IsDone True
[18:26:57 COM10]:after:flashSuccess is False set IsUpdate:false set IsDone true

Would really appreciate any help here.