How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

Build: Huawei MediaPad M5 lite BAHL09 hw ru BAHL09C170B271CUSTC170D001Firmware700r1EMUI5105014LUH

Huawei MediaPad M3 Lite 10 BAH-L09 Specification

this model of huawei powerd by Octa-core 1.4 GHz Cortex-A53 and the internal storage size and ram size is 16/64GB storage, microSD card slot. also it can support microSD, up to 256 GB.
besides it can support Nano-SIM .
the Gpu chip model is Adreno 505 and also the Chipset model used on this model is Snapdragon 435
The camera on the Huawei BAH-L09 comes with 8 and support 1080p video pixles.

the Second camera module is 8 MP and the body of Huawei MediaPad M3 Lite 10 BAH-L09 is 310g, 7.1mm thickness
The battry type for this smartphone is Non-removable Li-Ion 6660 mAh battery.

Notic: Please keep in mind that, you must
flash Huawei MediaPad M3 Lite 10 (BAHL09) firmware at your own
risk and also full responsible with you.

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

  • Flash Huawei MediaPad T3 7.0 Stock Firmware: How to Flash Huawei Stock Firmware – All Methods
  • Install Huawei MediaPad T3 7.0 USB Driver: Download & Install Huawei MediaPad T3 7.0 USB Driver
  • Make sure you are flashing the right flash file, We are not responsible for any harm that might come to your Smartphone.

Huawei MediaPad X2 – Firmware

Archive BETA firmware Android 6.0

Full faylohranilische for X2firmware source on http://emui.huawei.comXDA threadmirror on xda

Modifications and decorations

How to remove back the normal icons H / 3G / 4G, which does not fit to the antenna?

How to enable “Debugging USB”?

Ponazhimat several times on the second row in the “About phone” (the build number). Including the section “For Developers”, there in. 7th row – “Debugging USB”

How to turn on the display settings in “Starting the Manager” and “Manager rights” (from “Phone Manager”)?

With the help of the programPM Plus

How to enable screen sharing?

To do this you need to putmodified firmware.

Multi-window work only on some applications. You can enable split screen for all applications?

No setting the shutter sound when shooting a standard chamber (701L). Can be corrected?

How to save data before the firmware?

1. With the instrument Huawei “Backup”2. Use HiSuite program that is installed on your computer -http://consumer.huawei.com/minisite/HiSuite_en/3. With the help ofTitaniumbackup

How to get into Bootloader, TWRP, flash the drain?

Recovery:1. Clamp up button and switch (release after the appearance of the logo)2. When connecting the USB clamp both the volume and press the power button (release after the appearance of the logo)Butloder:1. The device is enabled, USB connected. Off machine; turn on the machine by holding the volume down.2. The device is enabled, USB connected. Reload, holding down the volume when switching ON.3. The device is enabled, USB is disabled. Off machine; hold down the volume down and connect the USB.4. From twrp: Reboot – Bootloader.5. From the Windows-console cmd.exe when USB is connected:adb reboot-bootloaderFlashing firmware:Clamp both volume and power on.

How compatible firmware for the 703L and 703LT?

– Firmware for the L and LT are compatible, but only complete. Incremental (partial) update may not install.

Button does not work during manual installation Setting apk. What to do?

Turn off the item “protection of” in the settings under “Display”, disable any programs that change the color of the screen on the Screen Filter type

When firmware fastbutom get the error ‘error: can not load’ SYSTEM.img ‘. How to fix?

  • ADB and fastbootYou must be installed on drive C
  • Check the presence and correct name sewn IMG (case sensitive).
  • Adb refresh to the latest version.

When firmware fastbutom error ‘FAILED (remote: Command not allowed)’

Most likely, you have the bootloader locked.You have from the “PHONE Unlock” box label, but they have not been received and the code has not been unlocked?Do not believe it – some phones “out of the box” show that they supposedly unlocked, but it is not. You needget the unlock code and unlock the bootloader

How to get out of the Bootloader mode

Press the power button 10-20 seconds.

There is no curator in the subject. For questions about filling caps, please contact the section moderators via the “Complaint” button under the messages to which you want to add links.

Post has been editedderak1129 – 16.03.19, 12:04

Reason for editing: editing

Having some trouble getting Ruth and shoveled a bunch of sites, empirically derived method that has helped me and rutiroval few more bodies.I took the responsibility to write about getting ROOT rights.

First, we check if the loader on our phone is unlocked:

-vyklyuchaem body-zazhimaem volume down key-podklyuchaem PC.

If you see a white screen with a green robot and the word “PHONE Unlock” – then immediately proceed to obtain ROOT. If this line is not – proceed to unlock the bootloader.If you bought a new phone and you “PHONE Unlock” label, do not believe – some phones “out of the box” show that they supposedly unlocked, but it is not. You must obtain the unlock code and unlock it forcibly, otherwise it will not allow to flash across the fastboot (when trying to flash will read “Command not allowed”)

After receiving the download the codeX2 Bootloader unlock.zip(409.34 KB) and unpack in a convenient place and execute: 1. turning off the phone and holding the volume down, connect the cable to your PC and wait until the entry into bootloader mode.2. In the unpacked folder X2 Bootloader unlock unlock.bat we click, double click and select 33.potom disconnected from the PC and enter kod.Esli received in the mail all turned to see a green robot and treasured inscription “PHONE Unlock”.

for Ruth necessary:

and unpack to the C drive of your PC. 2. Download

and copy the folder to adb 3. In Depending on the firmware download the-for V012

boot.b012.img(22.73 MB) Ya disk boot.b013.img(22.73 MB) Ya disk

Copy the downloaded image in adb folder and rename it just boot

4. In adb folder we click twice on the Start Here5. in line recruit

Retrieved on 5 device, including those who did not want to succumb to other schemes

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

All this of course is a personal otvetstvennost.Vsem luck: thank_you:

Reason for editing: Added information about the pseudo-anlokd out of the box and a link to the summary instruction

Good day to all.By popular demand shifted to Ya.Disk files for RTH of hats.And I spread everything found and protests from XDA forum HUAWEI and China in particular Komrad KangVIP of the team HRT.

Preparation rekaveri TWRP (2.8.7.0) and return to their native rekaveri

: -Dark theme -Light theme (Temporarily unavailable) -Plai topic (Temporarily unavailable)

Log in rekaveri performed by switching off the device by holding the Volume keyup and turn on the phone . And now we can enjoy all the benefits of third-party rekaveri in English. Deprived of the possibility to update OTA, but you can easily return to the factory through the same batch file.

Firmware KANGVIP v.1.3 We download from here

and throw in the phone memory or the card. Energize the body of at least 50% by .Ustanavlivaem rekaveri TWRP, entering it through clenched volume up and power button on off tele.Chistim dalvik cache (I’ve done both before and after)Finding clean from the Chinese junk and programs that we believe are not necessary.What we get:

-Full RUTH-double tap for unlocking (included in a separate application)-a new section in the Advanced settings settings, where there are tremendous setting for your devaysa(Advanced floating button bar at the top and bottom, invisible virt.knopki top, advanced display settings, change DPI and more)- support init.da normally operating Lucky Patcher-extensions reboot menu-Best multi-tasking and other improvements

If you just did not get a double tap or change the DPI takes off the camera rolls through TWRP next patch

All tested and testirovano.Vso do under its own responsibility, and re-read the instructions two to three times: yes2:

Reason for edit: updated broken links corrected instruction

threw onYa.Disk any updates or usefulness :

1) UpdatedKangVip on the version B015 from 08.06: X2-B015-Kangvip.zip (Taken from – everything is in the readme.txt in the same place) 2) Completeofficial B015 : GEM-703L_EMUI3.0.5_Android5.0_V100R001C233B015.zip This, as I understand it, the one that flew on top of the OTA B013. Simply complete file for a clean installation.3) AndRecovery from B015at the same time.4) A method (and program)razderbanivaniya to the original firmware (UPDATE.APP) to files.(Translated and also added a description of how to use it in the readme.txt file)With this piece can be partially razderbanit firmware. To pull out of her recovery, boot. Pull out the system files from the system and cust, etc.

And finally, againabout departing GApps I stumbled on this here is the solution:

How to open on the Chinese firmware Gapps:

1. Get Root2. Ustanavlevaem Root Explorer3. Go on the road / sust / channel / charm_china_u / xml4. Find the unstall_apk.xml file and delete it.5. Restarting the device and after rebooting we have all the Gapps.

Important! After these manipulations updates OTA-mounted stop. Therefore it is better to make a backup copy of this file.

Post has been editedGonza555 – 10.08.15, 11:16

Reason for editing: In the header

By the way anyone at getting the rights Ruth Chinese or English su super offer super su repacked with the Russian language. use on health.

The original, and you shake 🙂

Bootloader unlocked, not boot pulled, do according to the instructions, everything is OK, super su does not appear rootchek fails .. Any idea what’s wrong?

udaff_kaa, 1) for some instructions? 2) Where did you get

boot for your firmware?

1. Instructions of the cap2. I did not know that the bottles need patched, thought of the firmware of-fit ..

Checking whether the bootloader is unlocked! As it is now to get out of this mode to normal!

qwert37, Hardly, therefore, netak vyrazilsya.vazhno get Ruth, make sure that you will get it, and then install juzverej programmu.potomu if not checked and sewing up the program type Superpower system vosche then it was impossible to repeat the boot firmware, ie sewn, he sews, yes Ruth bylo.po least I was so

vitamor80, Quote is not mine.

mavric83 Do not believe it but b015 Ruth received as advised komrad SanyaDV41, that is simply installed rekaveri manner of a cap, and through him, and was flashed SuperSu get a full rut without any shamanism.

qwert37, Tried the same, but see Kriven’ko risen and now no-flashing the firmware does not shlo.prikol is that rekaveri hand there, super su sewn and Ruth net.karoche revert back to 106sp1 106 did not work any of metodom.I only through adb stitched system partition (wipes are not done, and all survived) was able to return to normal firmware and re-stitched and rekaveri superbut, Ruth stood as a podobaet.v once again made sure that better yourself through adb handles delat.vidat feature of this device: rofl:

San4yk, I do not think that 701 camera kaordinalno different from 703, unit cost is the same for sure.And in the chamber 703 is not a fountain, to personal needs and lack the glory of God.

On 701L filled rekaveri TWRP oninstructions in the headerfrommavric83 . Rose fine, everything works. Then I tried to put the firmwareKANGVIP B015and surprisingly, also rose, but:

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

Once the memory and the processor is sad, and the screen resolution is interesting. Now think: back right to alter or even experiment with formatting partitions? : Wacko:

Post has been editedAllexus2008 – 19.09.15, 11:27

Allexus2008, remember to x1 (501L) can be set by firmware 503L Chinese. However, when such manipulation was required to download a universal folder some. Probably the same thing here. One hundred% compatible firmware, but not enough couples file for a successful operation

to experiment with formatting partitions?

Post has been editedJustACat – 19.09.15, 14:52

Backup Huawei MediaPad T3 7

Backup all your important data before flashing the Huawei MediaPad T3 7.0 Stock Firmware because installing firmware will erase all your data:

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

  • GO to the Backup app on your home screen.
  • Tab on Backup & Choose the location to which you want to back up your data

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

  • Then touch   Back up to begin the backup.
  • set a password, you can Skip if you don’t want to set a password
  • After this is complete, tab Next to begin the backup.

Restore Huawei MediaPad T3 7

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

  • Go back to the Backup app, & tab on Restore
  • Choose the source of the data to be restored, and touch Next

How to Flash Huawei MediaPad T3 7.0 Stock Firmware – All Firmwares

  • Enter your password you set up early then touch OK
  • Select the data you want to restored and touch Start restoration.
  • Once you choose to restore your back up data
  • Finally, tab on OK to finish.

Read also: How to ROOT Huawei MediaPad X1 7.0

Оцените статью
Huawei Devices
Добавить комментарий