Huawei MediaPad 10 FHD S10-101u Stock Firmware

The best option is to download the firmware from the official website of the manufacturer, as there are always up-to-date versions that will definitely work without problems on your device. And most importantly, they are safe and will not contain malware.

Sooner or later, the moment comes when Huawei MediaPad 10 FHD starts to work poorly, slow down and give frequent errors. In this case, the Huawei MediaPad 10 FHD firmware should help solve these problems.

However, with simple freezes, the system should not be immediately reflashed, first you need to make sure that you cannot solve the problem in another way. If there are no options, then you can install a new OS. You can do this yourself, without the services of specialists, if you strictly follow the instructions below.

Here you will find all the latest Huawei firmware for Huawei MediaPad 10 FHD S10-101u. If you are looking for Huawei MediaPad 10 FHD S10-101u stock ROM firmware, then you are on the right page.

Before downloading, make sure your device is Huawei MediaPad 10 FHD S10-101u, if it is not, then flashing the below stock firmware can brick your device.

The Huawei MediaPad 10 FHD S10-101u firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device.

File Name: Huawei_MediaPad_10_FHD_S10-101u_4.1_C500B020_MIRA.zip

File Size: 238 MB

Android OS Version: 4.1

Also: Huawei G6151 Stock Firmware

How to install Android 11 on any smartphone — huawei mediapad 10 fhd received an update to Android 11, this is an unofficial firmware from enthusiasts and techies, you can only install it using a computer, but the main thing is that it works. Here you will learn how to upgrade to Android 11. This method will help you install this OS even on very old smartphones, in addition, this version of the operating system is very well optimized.

USB debugging must be enabled and the battery charge must be at least thirty percent.

Done, it remains to reboot the phone and that’s it, the smartphone is in the process of updating and installing.

After that, you should turn on with the latest Android 11 or the version that you chose for the firmware.

Содержание

Download updates (firmware)

The release date of official updates is not exactly known, and why are they now. All these update schedules from the manufacturer are complete bullshit, today your phone is there, but not tomorrow, how many times has it already been that the release was postponed or not released at all.

The instruction was prepared by Msk Tablet LLC.

Firmware can be done in more than one way, we will consider the most effective one below, it will allow you to update Android as simply and quickly as possible.

Preparing for flashing

First you need to determine exactly what firmware is needed. The fact is that in rare cases this can kill the device and then the help of the wizard will be required.

Before starting the firmware, you need to charge the tablet, as mentioned above, and have a computer and a USB cable, a flash drive with the FAT32 file system.

Since the memory will be cleared, you need to transfer all important data to another location or make a backup copy to a memory card or computer. After that, you need to reset the settings to roll back the system to the factory settings. Next, you need to insert a memory card into the tablet, and then connect it to the computer using a USB cable.

Open a memory card on the computer and save the archive with the firmware there, it should be the “dload” folder (inside which are the update.app and unlmt.cfg files).

Preparations for installing a new system are over, after these steps, you can start actually flashing the tablet.

Reboot and Flash

After everything has been done according to the instructions, the device must be disconnected from the computer and turned off, and then turned on again. The installation should complete automatically.

After turning on the device, a green robot will appear on the screen – a symbol of the Android operating system, and under it – the firmware installation scale. After the installation is complete, the tablet should start in normal mode.

However, there are options when, after the preparation has been done, the installation does not start automatically. For this to happen, several steps must be taken. Two available ways to solve this problem will be discussed below.

If the firmware has not started

The firmware process has not started, but you should not panic right away: there are two simple ways to solve this problem (the firmware files should already be on the flash drive in the dload folder). First: you need to launch the tablet and go to the “Calculator”. There you need to dial the combination ()()2846579()()=. This will open the hidden service menu. Open the “Project Menu Act”, in the next window click “Upgrade”. Next, select “SD card upgrade” and finally – “SD card upgrade External Storage”.

If after these steps the tablet automatically restarts, then this is not a mistake, on the contrary, everything was done correctly. Next, the green robot should appear again in full screen and a scale that shows the progress of the installation of the system.

You need to get a USB flash drive from the tablet and connect the included tablet to the computer using the same cable. The main difference from the standard installation is that the unpacked firmware file must be dropped into the internal memory in the dload folder. This is what we do.

Next, disconnect the device from the computer, go to the “Calculator” and enter ()()2846579()()=. Hidden settings will open. There we select the section “Project Menu Act”. When it opens, click “Upgrade”. In the new window, select “SD card upgrade”. Then the last menu we need will open, in it we click “SD card upgrade Internal Storage”. After these simple steps, the tablet will go into a forced reboot, then the robot will appear again and the software installation will begin. If this does not happen, it means that a mistake was made somewhere and you need to try again.

When the tablet boots up, it should not be touched for some time, as it will be updated for the touchscreen and modem, after which the device will go into reboot again. This completes the installation.