Не сделай Кирпич! STK-LX1, HRY-LX1 и HRY-LX1T —

Firmware information:

Product name: Huawei P Smart Z/STK-LX1Type: Full ROMSize: 4 GBSoC: Kirin 710Os: Android 9.0Password: NullRoot access: NotGapps: IncludedProduct Version: 9.0.1.132

How to install ota firmware with twrp:

Note: Some More Installation Method (Including New DNS Method) You Can try From Here

have any question Let Me Know Via Comment.

Read also:

1. How to unlock Bootloader
2. How to Repair IMEI Number

So this is a Complete Guide to Flash This Device. if You have any question Let Me Know via Comment.

How to install ota with pen drive/sd card:

• Open the Zip and extract the dload folder on the pendrive
• Turn off the Phone
• Connect the pendrive with the OTG cable
• Now press the three buttons at the same time.
• Volume Volume – Power button.

Note: You Can use SD card also, Extract Zip in Phone Storage and Same Process.

Optional Method:

• Enter the service menu by dialing * # * # 2846579 # * # *
• Press Option 4. Software Upgrade
• Press OPTION 1. Memory Card Upgrade

How to unbrick huawei p smart z:

Open CMD and type below code’s

fastboot flash boot boot.img
fastboot flash system system.img
then fastboot reboot

Note: if You have Dead or Locked Huawei Phone then Final Solution is Paid with with test Point(Flash it With IDT Require Image (board Software) From Easy Firmware)

Note-

1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.2. Please Do carefully, We are Not Responsible for any Damage to Your Device.3. Must backup NVRAM using this Guide before Doing anything.4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Must Require:

1. backup NVRAM2. backup Your Personal data3. Create a nandroid backup

Не сделай кирпич! stk-lx1, hry-lx1 и hry-lx1t —